[Public-List] Water Pump

[Gordon Laco]

Hi there - 

I have already changed the screws for Robertsons - for the same reason you
suggest Allens.  I also lay a cloth under the pump assembly to catch things
I may drop.  

I am going to try the entire pump removal method this weekend.

Well first sail of the year yesterday (three months later than usual) and
first race is tonight.

Gord #426 Surprise


On 6/17/09 7:19 AM, "Bill Newman" <newman423 at sympatico.ca> wrote:

> Re: "Water Pump Cover
> 
> I have changed the little slotted brass screws on the cover to Allen screws
> the same size.  This makes life much easier since the Allen key stays in the
> screw and retains it for both removal and insertion.  When putting the cover
> on, secure it with a piece of thread so it is not lost in the bilge until you
> have one ot two screws in.  When you buy the Allen screws get a few extra in
> case you drop one.
> 
> Bill Newman
> Marion Rose, #233
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org


 1245240442.0