[Public-List] Replacement Cahin Plates

Roger L. Kingsland r.kingsland at ksba.com
Thu Mar 26 12:16:25 PDT 2009


Thanks Larry - the originals are on the way. 


-----Original Message-----
From: public-list-bounces at lists.alberg30.org
[mailto:public-list-bounces at lists.alberg30.org] On Behalf Of Lawrence Morris
Sent: Thursday, March 26, 2009 1:57 PM
To: Alberg 30 Public List -- open to all
Subject: Re: [Public-List] Replacement Cahin Plates

Roger,

I am the proud owner of Hull #501, "Solstice" and operate a marine services
company in the Baltimore area.  If you can provide me with your original
chain plates to use as a pattern, I will fabricate new replacements from 1
1/4" x 1/4" stainless bar stock for $185.00 plus shipping

Sincerely,

Larry Morris
Bosun Yacht Systems, Inc
443.742.9878

On Mar 26, 2009, at 2:03 PM, Roger L. Kingsland wrote:

> Hi Folks,
>
> I am shopping around the internet for new chain plates.  Original ones 
> from good old #148 are 3/16" x 1-1/4"; 2 at 8" long, 1 at 9", 2 at 10" and 
> 2 at 11"; 67"
> total.  I have feelers out for 1 piece, 6 feet long, 1-1/4" wide and 
> 1/4"
> thick (figured a good idea to go up from 3/16" because so many of my 
> original ones have cracks) and 2 suppliers have said it would cost 
> around $40 except they have a minimum order of $100 and up. Does 
> anyone else needs chain plates and want to piggy back on my minimum 
> order.  I can order them precut to the correct lengths and ship them 
> from my office (they should about 7 pounds).
>
> Also, there is an old time machine shop a few blocks from my office 
> that charges $45/hour.  They estimate 4 to 6 hours to fabricate the 
> new plates (from my bar stock) & cut and drill the old ones (no 
> polishing and rough cuts for the curved ends that I would finish off 
> on my grinding wheel).  I would be happy to include others in that 
> work as well.  I figure (no
> guarantees) $40 for material, $180 (4 hrs each set) for fabrication 
> and $15 for shipping; under $250 total (hopefully less) per set ready 
> for grinding and polishing.
>
> Anyone interested?
>
> Roger
>
>
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org

_______________________________________________
These businesses support your Association:
http://www.alberg30.org/store/A30supporters.html
Please support them.
_______________________________________________
Public-List mailing list
Public-List at lists.alberg30.org
http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org


 1238094985.0


More information about the Public-List mailing list