[Public-List] Chain plates all the same?

[Bob Norway]

Michael,

I'm located over on the Space Coast at Patrick AFB. Yes, I'll be checking locally for a fix. I've a friend who is a rigger by trade and will get with him. Thanks.

Cheers,
Bongo Bob Norway
TLCB Webmaster
www.tlc-brotherhood.org

~~~~~
 Õ¿Õ¬
  ~~
   V

-----Original Message-----
From: public-list-bounces at lists.alberg30.org [mailto:public-list-bounces at lists.alberg30.org] On Behalf Of crufone at comcast.net
Sent: Monday, March 30, 2009 9:08 AM
To: Alberg, Public List
Subject: [Public-List] Chain plates all the same?



Bob, 



You mentioned that you were in Florida.  Whereabouts?  If you are near Tampa, Miami or Jacksonville you should be able to purchase the SS bar stock from any number of metal suppliers.  Better yet, purchase 'drops' or 'cut-offs' from a frabricator at half the cost.  I purchased SS strap for mast hounds for a smaller boat here in Ft. Myers. 



I assumed that you would drill and finish off the ends of the bar stock for the chain plates yourself.  Thus no need to wait on shipping and you could easily replace one pate at a time without taking the mast down. 



This is a straight forward fairly simple fabrication/installation process. 



Michael 




Thanks Michael, 

My thoughts, too. But one at a time would be awfully time intensive sending them back and forth, plus boat being out of commission for the time each plate is processing. Will do some checking locally and see what I can come up with... 

Cheers, 
Bongo Bob Norway 
S/V Beowulf, #488 
TLCB Webmaster 
www.tlc-brotherhood.org 

~~~~~ 
 Õ¿Õ¬ 
  ~~ 
   V 
_______________________________________________
These businesses support your Association:
http://www.alberg30.org/store/A30supporters.html
Please support them.
_______________________________________________
Public-List mailing list
Public-List at lists.alberg30.org
http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org


 1238419580.0