[Public-List] Interior painting/ Cetol Light

John Birch Sunstone at cogeco.ca
Sun Nov 15 07:42:53 PST 2009


Dave

The Product is likely 3M Finesse It. Used it on my A Cat, does a great job.

John

----- Original Message ----- 
From: "David Terrell" <dterrell1 at charter.net>
To: "Alberg 30 Public List -- open to all" <public-list at lists.alberg30.org>
Sent: Sunday, November 15, 2009 9:11 AM
Subject: Re: [Public-List] Interior painting/ Cetol Light


>I used cetol  natural on  the exterior teak with good results. If I were 
>going to use in the interior, I would expect good results. I used off white 
>brightsides on the cabin ceiling with good results rolling and tipping. To 
>do better I would have to spend more time prepping it - mostly fairing and 
>sanding with increasingly fine grit paper.
>
> Last summer one of my friends told me of a polish that produces a gelcoat 
> like finish when used on a painted surface like brightsides. He purchased 
> it at a local automotive supply house. At this moment, I can not remember 
> the product's name.
>
> David, 432
>
>
> ---- Timothy Erwin <sailtim at yahoo.com> wrote:
>> I just repainted Sonsy's interior this past Spring. I was sorta like 
>> doing a bottom job in a closet. I used pittsburg industrial alkyd enamel. 
>> It looks great and was worth it.
>>
>> I used the Cetol natural teak with clear coat. Three coats of each. Looks 
>> great, no orange tint at all.
>>
>> Good luck with the interior paint job, you will be real happy when you 
>> are finished.
>>
>> Tim # 200
>>
>>
>>
>>
>> ________________________________
>> From: Matthew Hay <mattrhay at gmail.com>
>> To: public-list at lists.alberg30.org
>> Sent: Sat, November 14, 2009 9:33:29 AM
>> Subject: [Public-List] Interior painting/ Cetol Light
>>
>> Hello,
>>
>> How was the storm for you down on the midcoast?
>>
>>
>> I have one or two (at most) original coats of interior paint that is
>> starting to peel. I am thinking a combo of scraper/small electric sander 
>> on
>> rough spots, and then sanding the surface of existing paint for paint
>> adhesion? I am assuming that 1968 paint contains lead so I want to
>> encapsulate. My two and four year old boys sleep and play on board
>> frequently. Any advice would be very helpful about this process as well 
>> as
>> what paint you have used. Also, has anyone tried the new Cetol light?
>> (sounds like a beer type beverage) If so,(not as beverage) how was it? I
>> am specialy interested in what paints different people have used.
>> Thank you very much,
>>
>> Matt Hay
>> #314 Renard 1968
>> _______________________________________________
>> These businesses support your Association:
>> http://www.alberg30.org/store/A30supporters.html
>> Please support them.
>> _______________________________________________
>> Public-List mailing list
>> Public-List at lists.alberg30.org
>> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>>
>>
>>
>>
>> _______________________________________________
>> These businesses support your Association:
>> http://www.alberg30.org/store/A30supporters.html
>> Please support them.
>> _______________________________________________
>> Public-List mailing list
>> Public-List at lists.alberg30.org
>> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> 



 1258299773.0


More information about the Public-List mailing list