[Public-List] contact cement for new bulkhead laminate

[Daniel Michaels]

Seal the edges and I do not think you will have a problem.

Dan

--- On Tue, 8/31/10, Roger L. Kingsland <r.kingsland at ksba.com> wrote:

From: Roger L. Kingsland <r.kingsland at ksba.com>
Subject: [Public-List] contact cement for new bulkhead laminate
To: "'Alberg 30 Public List -- open to all'" <public-list at lists.alberg30.org>
Date: Tuesday, August 31, 2010, 10:01 AM

I have a plan to use contact cement (the stuff they use to adhere plastic
laminate to kitchen counters) to fasten 1/8", 3 ply Oakum plywood to the
areas below on good old 148 that are now wood grain plastic laminate
(bulkheads, sides of bunks and galley. etc.).  I refastened any delaminated
areas w/ epoxy and sanded the existing laminate.  
 
Does the contact cement seem like a good way to attach the new paneling?
Does anyone know of problems doing this in a marine environment?
 
Any thoughts would be greatly appreciated?
 
Thanks,
 
Roger 148 
 
 
_______________________________________________
These businesses support your Association:
http://www.alberg30.org/store/A30supporters.html
Please support them.
_______________________________________________
Public-List mailing list
Public-List at lists.alberg30.org
http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org



      
 1283277828.0