[Public-List] contact cement for new bulkhead laminate

[mahseer at kos.net]

Roger.

I used contact cement on top of sanded laminate, it looked good for couple
of years then began to pop off.

John Boor
MAHSEER #380


> I have a plan to use contact cement (the stuff they use to adhere plastic
> laminate to kitchen counters) to fasten 1/8", 3 ply Oakum plywood to the
> areas below on good old 148 that are now wood grain plastic laminate
> (bulkheads, sides of bunks and galley. etc.).  I refastened any
> delaminated
> areas w/ epoxy and sanded the existing laminate.
>
> Does the contact cement seem like a good way to attach the new paneling?
> Does anyone know of problems doing this in a marine environment?
>
> Any thoughts would be greatly appreciated?
>
> Thanks,
>
> Roger 148
>
>
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>


 1283286614.0