[Public-List] contact cement for new bulkhead laminate

[dan walker]

how do u compress the entire surface(s) for good contact

--- On Tue, 8/31/10, Roger L. Kingsland <r.kingsland at ksba.com> wrote:

> From: Roger L. Kingsland <r.kingsland at ksba.com>
> Subject: [Public-List] contact cement for new bulkhead laminate
> To: "'Alberg 30 Public List -- open to all'" <public-list at lists.alberg30.org>
> Date: Tuesday, August 31, 2010, 11:01 AM
> I have a plan to use contact cement
> (the stuff they use to adhere plastic
> laminate to kitchen counters) to fasten 1/8", 3 ply Oakum
> plywood to the
> areas below on good old 148 that are now wood grain plastic
> laminate
> (bulkheads, sides of bunks and galley. etc.).  I
> refastened any delaminated
> areas w/ epoxy and sanded the existing laminate.  
>  
> Does the contact cement seem like a good way to attach the
> new paneling?
> Does anyone know of problems doing this in a marine
> environment?
>  
> Any thoughts would be greatly appreciated?
>  
> Thanks,
>  
> Roger 148 
>  
>  
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> 


      

 1283286761.0