[Public-List] Cutlass Bearing Flange.

[John Birch]

Righty tighty, lefty loosie - standard, unlike turnbuckles.

It's bronze, not aluminum, by the way.

Best

John


----- Original Message ----- 
From: <crufone at comcast.net>
To: "Alberg, Public List" <public-list at alberg30.org>
Sent: Friday, July 23, 2010 10:40 AM
Subject: [Public-List] Cutlass Bearing Flange.


>
>
> Simple Question,
>
>
>
> To remove this aluminum flange is it turned Anticlockwise or Clockwise? 
> Because mine might be stuck in place I don't want to break it wilst trying 
> to remove it by turning the wrong way,i.e., tightning instead of 
> loosening.
>
>
>
> Michael #133
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> 



 1279896284.0