[Public-List] Cutlass Bearing Flange. PS

[John Birch]

Have someone inside holding the stern tube with a monkey wrench (with the 
jaws padded) so it doesn't turn or else you are in for a whole stern tube 
rebedding and alignment.

And that would be a pain ....

Best

John

----- Original Message ----- 
From: "John Birch" <Sunstone at cogeco.ca>
To: "Alberg 30 Public List -- open to all" <public-list at lists.alberg30.org>
Sent: Friday, July 23, 2010 10:44 AM
Subject: Re: [Public-List] Cutlass Bearing Flange.


> Righty tighty, lefty loosie - standard, unlike turnbuckles.
>
> It's bronze, not aluminum, by the way.
>
> Best
>
> John
>
>
> ----- Original Message ----- 
> From: <crufone at comcast.net>
> To: "Alberg, Public List" <public-list at alberg30.org>
> Sent: Friday, July 23, 2010 10:40 AM
> Subject: [Public-List] Cutlass Bearing Flange.
>
>
>>
>>
>> Simple Question,
>>
>>
>>
>> To remove this aluminum flange is it turned Anticlockwise or Clockwise? 
>> Because mine might be stuck in place I don't want to break it wilst 
>> trying to remove it by turning the wrong way,i.e., tightning instead of 
>> loosening.
>>
>>
>>
>> Michael #133
>> _______________________________________________
>> These businesses support your Association:
>> http://www.alberg30.org/store/A30supporters.html
>> Please support them.
>> _______________________________________________
>> Public-List mailing list
>> Public-List at lists.alberg30.org
>> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>>
>
>
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> 



 1279896458.0