[Public-List] Cutlass Bearing Flange. PS

[Jeffrey]

Just a warning, I did this project this spring, and no way could I
hold the stern tube on the inside while the outside was turning. It
all came out together.  A simple job turned into a much bigger job in
my case.

I'm glad to have removed all the bedding gunk, but I bet I could have
removed the bearing in place.

-jeff

On Fri, Jul 23, 2010 at 10:47 AM, John Birch <Sunstone at cogeco.ca> wrote:
> Have someone inside holding the stern tube with a monkey wrench (with the
> jaws padded) so it doesn't turn or else you are in for a whole stern tube
> rebedding and alignment.
>
> And that would be a pain ....
>
> Best
>
> John
>
> ----- Original Message ----- From: "John Birch" <Sunstone at cogeco.ca>
> To: "Alberg 30 Public List -- open to all" <public-list at lists.alberg30.org>
> Sent: Friday, July 23, 2010 10:44 AM
> Subject: Re: [Public-List] Cutlass Bearing Flange.
>
>
>> Righty tighty, lefty loosie - standard, unlike turnbuckles.
>>
>> It's bronze, not aluminum, by the way.
>>
>> Best
>>
>> John
>>
>>
>> ----- Original Message ----- From: <crufone at comcast.net>
>> To: "Alberg, Public List" <public-list at alberg30.org>
>> Sent: Friday, July 23, 2010 10:40 AM
>> Subject: [Public-List] Cutlass Bearing Flange.
>>
>>
>>>
>>>
>>> Simple Question,
>>>
>>>
>>>
>>> To remove this aluminum flange is it turned Anticlockwise or Clockwise?
>>> Because mine might be stuck in place I don't want to break it wilst trying
>>> to remove it by turning the wrong way,i.e., tightning instead of loosening.
>>>
>>>
>>>
>>> Michael #133
>>> _______________________________________________
>>> These businesses support your Association:
>>> http://www.alberg30.org/store/A30supporters.html
>>> Please support them.
>>> _______________________________________________
>>> Public-List mailing list
>>> Public-List at lists.alberg30.org
>>> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>>>
>>
>>
>> _______________________________________________
>> These businesses support your Association:
>> http://www.alberg30.org/store/A30supporters.html
>> Please support them.
>> _______________________________________________
>> Public-List mailing list
>> Public-List at lists.alberg30.org
>> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>>
>
>
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>



-- 
Jeffrey Fongemie

 1279896969.0