[Public-List] Cutlass Bearing Flange.

[vmarmei]

Anticlockwise....Facing the flange turn left 
hand....This flange/housing has a right hand 
thread...just like any standard Hex head 
bolt....turn nut right onto a bolt nut  goes 
in....turn left nut comes out. You have to hold 
the brass tube from inside the boat with a pipe 
wrench and turn the housing out.....you have to 
break the caulking that holds the housing in 
place....but NOT the gray caulking that holds the 
shaft brass tube in place. Good luck and safe sailing.
Villo A30-KC

At 10:40 AM 23/07/2010, you wrote:
>Simple Question, To remove this aluminum flange 
>is it turned Anticlockwise or 
>Clockwise?  Because mine might be stuck in 
>place I don't want to break it wilst trying to 
>remove it by turning the wrong way,i.e., 
>tightning instead of loosening. Michael #133 
>_______________________________________________ 
>These businesses support your Association: 
>http://www.alberg30.org/store/A30supporters.html 
>Please support them. 
>_______________________________________________ 
>Public-List mailing list 
>Public-List at lists.alberg30.org 
>http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>No virus found in this incoming message.
>Checked by AVG - www.avg.com
>Version: 9.0.851 / Virus Database: 271.1.1/3023 
>- Release Date: 07/23/10 02:36:00

 1279903805.0