[Public-List] zinc anodes

[Richard J Hughes]

Zinc is CMPNZ-B (CMPNZ stands for Canadian Metal Prop Nut Zinc). No need to 
remove anything except the old zinc and screw (allan key) on the new one.
Magicienne # 438.

--------------------------------------------------
From: "Knickman Family" <knickman at gmail.com>
Sent: Monday, May 24, 2010 7:14 PM
To: <public-list at lists.alberg30.org>
Subject: [Public-List] zinc anodes

> Can anyone suggest a current source for zinc anodes that would fit the 
> A30?
> From searching the archives I saw several years ago that West Marine had 
> an
> appropriate one, but I tried to plug in the part # on the West website and 
> I
> had no luck.  I suppose that part #'s have changed?  Also, I am assuming I
> am looking for the "prop nut" style zinc?  If that is correct, do I remove
> the current prop nut and cotter pin and replace it with the nut that comes
> with the zinc?  There is no room for anything additional on the end of the
> prop shaft as it appears right now.  Thanks for any help or suggestions.
>                                    Ed Knickman
>                                    Blue Jay  #372
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org 


 1274756049.0