[Public-List] Whale Gusher 10

[Kris Coward]

The strum boxes I've looked at include a check valve just inside
the strainer, so...

Cheers,
Kris

On Mon, Apr 18, 2011 at 11:12:30AM -0400, moiraeiii at aol.com wrote:
> Short of a check valve located toward the bilge end of the hose, and even then the water down stream of the valve will drain back into the bilge, you will always have the volume of water equal to the length of hose from the bilge to the input of the pump plus the volume between the hose and bilge. Otherwise there is no prime. Groco does make these ranging in diameter from 1/2" - 2".
> Randy #283
> 
> 
> 
> 
> 
> -----Original Message-----
> From: Kris Coward <kris at melon.org>
> To: Alberg 30 Public List -- open to all <public-list at lists.alberg30.org>
> Sent: Mon, Apr 18, 2011 6:51 am
> Subject: Re: [Public-List] Whale Gusher 10
> 
> 
> 
> I have a similar layer of water, and am regualrly tempted to stick a
> nice strum box on the bilge end of my hose and see if that could help
> make it go away..
> 
> Cheers,
> Kris
> 
> On Mon, Apr 18, 2011 at 02:44:28PM +0000, jimcherry at sympatico.ca wrote:
> > 
> > Heres my pump story...........I know this sounds pretty obvious ... and I 
> should have been able to figure it out....but no one has ever accused me of 
> being a rocket surgeon before,....and I've made a few classic mistakes, 
> including this one.....
> > When I first bought my boat I was testing the manual bilge pump....it made all 
> the appropriate bilge pump noises,.... but no matter how furiously I worked the 
> handle, it wouldn't move the H2O from the bilge to the river. 
> > To make a very loong and frustrating story, short, I simply hadn't filled the 
> bilge with enough water for the bilge intake hose to have anything to suck. 
> Although the hose was located as close as it could be to the bottom of the 
> bilge, it was still a 1" diameter hose and as soon as the water got lower than 
> 1", it would just suck air ( and make bilge pump noises). The bilge still 
> "looked' full of water to me down there in the dark.
> > The pump was working fine ....the problem was somewhere 'north of the pump 
> handle"..... 
> >  
> >  
> >  
> > 
> >  
> > > Date: Mon, 18 Apr 2011 06:46:15 -0700
> > > From: notcmartin at yahoo.com
> > > To: public-list at lists.alberg30.org
> > > Subject: [Public-List] Whale Gusher 10
> > > 
> > > Hello All
> > > 
> > > My bilge pump didnt want to pump so ordered the rebuild kit and hoped for 
> the 
> > > best. New bits are installed and still no pumping. I found a stripped hole 
> and 
> > > some corrosion around the seals in the pump housing, I assume it's sucking 
> air 
> > > and cant prime. Does anyone have an old pump or pump housing in good shape 
> they 
> > > want to get out of the garage? 
> > > 
> > > 
> > > Before I order a new one, any other models to consider?
> > > 
> > > Thanks
> > > 
> > > Chris
> > > _______________________________________________
> > > These businesses support your Association:
> > > http://www.alberg30.org/store/A30supporters.html
> > > Please support them.
> > > _______________________________________________
> > > Public-List mailing list
> > > Public-List at lists.alberg30.org
> > > http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> >  		 	   		  
> > _______________________________________________
> > These businesses support your Association:
> > http://www.alberg30.org/store/A30supporters.html
> > Please support them.
> > _______________________________________________
> > Public-List mailing list
> > Public-List at lists.alberg30.org
> > http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> 
> -- 
> Kris Coward					http://unripe.melon.org/
> GPG Fingerprint: 2BF3 957D 310A FEEC 4733  830E 21A4 05C7 1FEB 12B3
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> 
>  
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org

-- 
Kris Coward					http://unripe.melon.org/
GPG Fingerprint: 2BF3 957D 310A FEEC 4733  830E 21A4 05C7 1FEB 12B3

 1303141102.0