[Public-List] Baby Stay Mast Connection ?

[Meinhold, Michael J.]

Perhaps a minor consideration, but I believe these modifications would
take her out of Chesapeake Bay Alberg 30 One-Design status.
I don't know if the Great Lakes rules would allow a baby stay.

What's the purpose of these added stays?  Mast bend?

Mike
Rinn Duin #272

-----Original Message-----
From: public-list-bounces at lists.alberg30.org
[mailto:public-list-bounces at lists.alberg30.org] On Behalf Of C Spalding
Sent: Thursday, March 03, 2011 2:43 PM
To: public-list at lists.alberg30.org
Subject: [Public-List] Baby Stay Mast Connection ?

Spring is almost here and time to look at mast projects
Installing a baby stay and inquiring as to the distance above the
spreaders to install the connection
Will use a 3/8 inch through bolted tang 
Deck connection will be at the anchor locker bulkhead which has been
bulked up with 2 layers of 1/4 inch ply each glassed to the underside
crown of the deck with 2 knees glassed to the anchor bulkhead and
installed ply
will use a pelican hook and turnbuckle 

-- don't want to install too far above the spreaders as I do not want to
add backstay shrouds

If anyone has acomplished this before their experience would be
appreciated

Thanks
C Spalding
Blue Horizon
#374
Toronto, Canada
PS In the future I will be selling off the Atomic 4 for parts or
transmission rebuild (motor does work last time I started it which was 3
years ago)
the muffler made from copper (i'll give a spot a shine to make sure)
the boom, don't know if it is orginal or not it's 14Ft 9In roller with
handle
so if anyone is interested send me an email
_______________________________________________
These businesses support your Association:
http://www.alberg30.org/store/A30supporters.html
Please support them.
_______________________________________________
Public-List mailing list
Public-List at lists.alberg30.org
http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org

 1299181855.0