[Public-List] Brad re: Replacing spreaders and spreader base

[John Brugeman]

Yes, I think I still have those spreader brackets somewhere if someone is 
interested.  





________________________________
From: Richard J Hughes <rjhughes at shaw.ca>
To: Alberg 30 Public List -- open to all <public-list at lists.alberg30.org>
Sent: Wed, March 2, 2011 4:52:36 PM
Subject: [Public-List] Brad re: Replacing spreaders and spreader base

I bought a good  used set of wooden spreaders last year from John Brugeman, and 
at that time he did have the bases (teigns ?) available.  Sorry I don't have his 
email address any more, but I'm sure someone on this email list will.
Hope that helps.
Rick # 438.


-----Original Message----- From: Brad OConnell
Sent: Wednesday, March 02, 2011 1:31 PM
To: public-list at lists.alberg30.org
Subject: [Public-List] Replacing spreaders and spreader base

Hi everyone,

late last season, I had one of the two parallel plates which stick out from the
spreader base, through which the wooden spreaders are bolted, fail on me. On
closer inspection, both sets look rotten. It appears they were repaired at least
once, and the welds are badly oxidized.

I'd like to replace both bases, and the spreaders themselves. Anyone know who I
could go to to get these fabricated?


_______________________________________________
These businesses support your Association:
http://www.alberg30.org/store/A30supporters.html
Please support them.
_______________________________________________
Public-List mailing list
Public-List at lists.alberg30.org
http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org

 1299113645.0