[Public-List] Replacing spreaders and spreader base

[John Brugeman]

Brad,

If you could post a picture of the spreader brackets that you have, I will see 
if the ones I have match. Or, send a picture via email. There were a couple of 
different types and I don't think you would want to drill new holes in the mast 
for a different set.  


John Brugeman
johnbrugeman at ameritech.net



________________________________
From: Brad OConnell <oconnell_brad at yahoo.com>
To: public-list at lists.alberg30.org
Sent: Wed, March 2, 2011 4:31:05 PM
Subject: [Public-List] Replacing spreaders and spreader base

Hi everyone,

late last season, I had one of the two parallel plates which stick out from the 
spreader base, through which the wooden spreaders are bolted, fail on me. On 
closer inspection, both sets look rotten. It appears they were repaired at least 

once, and the welds are badly oxidized.

I'd like to replace both bases, and the spreaders themselves. Anyone know who I 
could go to to get these fabricated?

thanks in advance,

Brad O'Connell
#186
Monsarrat
_______________________________________________
These businesses support your Association:
http://www.alberg30.org/store/A30supporters.html
Please support them.
_______________________________________________
Public-List mailing list
Public-List at lists.alberg30.org
http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org

 1299114073.0