[Public-List] block sized

[Roger L. Kingsland]

Hi Folks,

 

Working on the mast; spreaders went on OK (the tapered side of the wood ones
goes forward, right?), need to replace topping lift and spinnaker halyard
blocks.  I have a couple of Harken bullet blocks with a 485 lb working load.
I assume one will be OK for the topping lift but wonder about the spin
halyard.  Any suggestions as to working load for the block?

 

Thanks,

 

Roger

 

 

 

Roger Kingsland, Managing Partner

Kingsland Scott Bauer Associates

 

KSBA

  _____  

Architects/Planners/InteriorDesigners/ProjectManagers

 

3441 Butler Street

Pittsburgh, PA 15201

N 40° 27.8344'  W79° 57.9831'

 

412-252-1500 ext.101 

412-779-5101 cell 

412-252-1510 fax

 <blocked::blocked::mailto:r.kingsland at ksba.com> r.kingsland at ksba.com

 <blocked::blocked::http://www.ksba.com/> www.ksba.com