[Public-List] CETOL and Varnish

[Mike Lehman]

CB

I have never tried that and not sure why you would want to do that instead 
of all cetol. I have heard of epoxy with varnish over top for UV protection. 
As an alternative can I recommend Armada 'Water Clear' finish. It is like 
cetol, but is completely clear and lets the natural beauty of the wood show 
through. It is available in hi-gloss and satin. I like the hi-gloss look 
personally.  In my experience it last much longer than cetol. I usually let 
it dry for 48 hours between coats and follow the directions on the can. It 
is very easy to touch up on toe rails. See link below...

http://store.hamiltonmarine.com/browse.cfm/teak-finish-hi-gloss-armada-quart-clear-736655/4,42719.html

-----Original Message----- 
From: C.B. Currier
Sent: Monday, May 23, 2011 10:35 AM
To: public-list at lists.alberg30.org
Subject: [Public-List] CETOL and Varnish

Anyone know the methodology with using Varnish and then applying cetol
overtop? I am thinking about this for the Toerail and all other exposed
wood on the deck.

C.B. Currier
Infinity #57 (on Cape Cod these days)
_______________________________________________
These businesses support your Association:
http://www.alberg30.org/store/A30supporters.html
Please support them.
_______________________________________________
Public-List mailing list
Public-List at lists.alberg30.org
http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org 


 1306168350.0