[Public-List] Hull thickness question

[crufone at comcast.net]

Normally the 'great stuff' you purchase in the big box stores is not closed cell. While it forms a cuticle over it's outside surface that too will allow water to penetrate to foam inside. If you want closed cell then you need to specifically designate closed cell. Usually much more expensive and I don't know if it is available in a foam application. Usually just in sheets and blocks. 

----- Original Message -----
From: "Rod Symmes" <weatherhelm at hotmail.com> 
To: "A30 List" <public-list at lists.alberg30.org> 
Sent: Wednesday, November 9, 2011 11:43:09 AM 
Subject: Re: [Public-List] Hull thickness question 


 >the foam was in the bag, which I hope will inhibit the absorption of water.< 

Gord - do you know if the cans of expanding foam result in open cell or closed cell foam ??  Any time I have used the stuff around the house where it cures while exposed to the air it appears to skin over with a surface that looks like it would shed water. [ Not so if you trim off the excess with a knife. ]   
Any thoughts from anyone else ? 

Cheers,   Rod 

~~~~_/) ~~~~~~~~~~ 
~~~~~~~_/)  _/) ~~~~~~~ 
~~_/) ~~~~~~~~~~~~ 


                                                
_______________________________________________ 
These businesses support your Association: 
http://www.alberg30.org/store/A30supporters.html 
Please support them. 
_______________________________________________ 
Public-List mailing list 
Public-List at lists.alberg30.org 
http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org 

 1320935576.0