[Public-List] Rachel - Hull thickness question

[Rachel]

On Nov 9, 2011, at 3:14 AM, pat nolan wrote:

> Try using a small amount of hot glue on the ends or middle as a clamping force . Epoxy does not like strong clamping as it squeezes the glue out of the joint. It needs to be held only until the epoxy kicks . Fillet as necessary.

I agree with Pat here.  I would not screw anything into the hull (on top of possibly going through, a screw into fiberglass is not really very "grippy" unless you tap it, and I would not do that here).

Pat's method sounds about like what I would do. 

Rachel
ex-#221

 1320860180.0