[Public-List] Where to run wires from the mast into the boat

[Kris Coward]

I wish my wires ran through a hole in the mast step; I've got a pair of
deck fittings on either side of the mast that have done a fantastic job
of resisting my efforts to keep them from leaking in the rain.

-K

On Mon, Oct 31, 2011 at 04:19:56PM -0400, Jeffrey wrote:
> Hi everyone,
> 
> On my boat, the electrical wires from the mast run into the boat via a hole
> that runs through the mast step, through the beam and into the cabin.  Not
> exactly how I would have it, but it works, and since the hole is already
> there I use it. Since I've added an anchor light and an anemometer the
> extra wires have made for a tight fit through that hole.
> 
> I'm just wondering if anyone else has the same setup? If not, is there a
> good solution to get the wires into the cabin top? On other boats I've seen
> little bits of PVC to make a shielded opening but it does not look that
> clean.
> 
> -Jeff Fongemie
> #116 Seagrass
> 
> http://picasaweb.google.com/fongemie
> 
> 
> 
> 
> 
> 
> 
> 
> 
> -- 
> Jeffrey Fongemie
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org

-- 
Kris Coward					http://unripe.melon.org/
GPG Fingerprint: 2BF3 957D 310A FEEC 4733  830E 21A4 05C7 1FEB 12B3

 1320092976.0