[Public-List] Sealing the main hatch

[David Gilbert]

We replaced ours many years ago with plexi. Darkened stuff but we can  
still see out. I bought a section the exact size of the hatch, then  
cut it in half but on a bevel pointing down at the outside so that any  
water runs out. Easy stuff to work with, it cuts with an ordinary  
table saw and is easy to drill for padlock fittings.
Good luck.
David
On 25-Aug-12, at 2:36 AM, gregr at nethere.com wrote:

> Greetings All,
>
> I need to seal my main hatch before it starts raining again. It is  
> made of
> slats; at least three different types of wood. I stripped it a month  
> ago
> and have been letting it dry out. It has been suggested that I cover  
> it
> with a single layer of glass. I'm a bit worried how that will look  
> so I'm
> looking for suggestions.
> Any ideas?
>
> Greg
>
> S/V Ayla
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org


 1346001417.0