[Public-List] info request

[Mike Lehman]

Structural: Mast beam for delamination; bulkheads for any signs of rot; 
chainplates for any signs of weakness; spreaders and spreader bases
Plumbing: Gate valves; thru-hull fittings particularly the small ones which 
where hand made by Whitby; hoses clamps the usual stuff
Electric: wiring, you may find brown 'extension cord' for wiring that was 
common it that era
Decks: you will not find any deck problems unless there was damage to the 
boat; the cockpit sole may be a little soft (no biggie); window leaks.
Below water: no hull problems or blisters are expected; check the cutlass 
bearing and the rudder attachments, there should be minimal-to-no wiggle in 
both

Most of these things are standard check points for any boat

Mike Lehman

><((((º>`·.¸¸.·´¯`·.¸><((((º>`·.¸¸.·´¯`·.¸><((((º>
-----Original Message----- 
From: chris123
Sent: Tuesday, July 31, 2012 10:06 PM
To: public-list at lists.alberg30.org
Subject: [Public-List] info request

Greets:

Going to take a look at a mid 60's Alberg 30 tomorrow and was
wondering if there are any known issues with these years of production
that I should be looking for. What I mean is this, are there known
issues with these boats of the class year specifically. All the usual
stuff I can find...so just wondering if there is something else I
should be looking for.

Best and kind regards

-- 
/ch
_______________________________________________
These businesses support your Association:
http://www.alberg30.org/store/A30supporters.html
Please support them.
_______________________________________________
Public-List mailing list
Public-List at lists.alberg30.org
http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org 


 1343820627.0