[Public-List] Holding Tank

[Mike Lehman]

Stephen
I just bought this tank two months ago...but it is not a custom tank only the placement of the fittings. Even on the liner boats you need to cut holes in the main bulkhead outboard behind the cabinet in the head to run the hoses.

-----Original Message-----

From: Stephen Gwyn
Sent: 28 Jun 2012 20:11:10 GMT
To: public-list at lists.alberg30.org
Subject: Re: [Public-List] Holding Tank

I sent an e-mail to Raritan and got a quote around 500$ plus shipping.
I really wish I had bought one 5 years ago when they were 250$.
After calling several local fabricators, I got quotes of in the 700$
range for a custom tank. I ended up buying a 6 gallon rectangular tank.

I will be putting up pictures of the installation shortly. The main innovation
compared to the pictures on alberg30.org is that, if you have
a liner boat, you can cut holes in the liner and run the hoses
behind the liner, rather than cutting holes in the main bulkhead.

SG

--
------------------------------------------------------------------------
Stephen Gwyn                       | Tel: 1-250-363-3136
Canadian Astronomical Data Centre  | Fax: 1-250-363-0045
Herzberg Institute of Astrophysics | Cell: 1-250-885-6969
5071 West Saanich Road             | E-mail: Stephen.Gwyn at nrc-cnrc.gc.ca
Victoria, BC, V9E 2E7, Canada      | http://astrowww.phys.uvic.ca/~gwyn/
------------------------------------------------------------------------

_______________________________________________
These businesses support your Association:
http://www.alberg30.org/store/A30supporters.html
Please support them.
_______________________________________________
Public-List mailing list
Public-List at lists.alberg30.org
http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org

 1340917264.0