[Public-List] Muffler A4 and Masthead

Mike Lehman sail_505 at hotmail.com
Thu Oct 11 15:27:24 PDT 2012


Randall,

George has done a great job documenting the exhaust pipe arrangement that 
many of us have used, me included. I f you decide something different 
without the rise shown in the diagram, you will need to use a siphon break 
in the water line to prevent water from backing into the engine.



Mike Lehman

><((((º>`·.¸¸.·´¯`·.¸><((((º>`·.¸¸.·´¯`·.¸><((((º>
-----Original Message----- 
From: George Dinwiddie
Sent: Thursday, October 11, 2012 5:59 PM
To: Alberg 30 Public List -- open to all
Subject: Re: [Public-List] Muffler A4 and Masthead

Randall,

On 10/10/12 12:12 PM, randall weatherspoon wrote:
> I have read a few threads about the cast mastheads - I am currently
> designing a machined masthead for the old tear drop mast section, I am
> presently on hold with the project but would be glad to share work so far 
> as
> calcs if someone would like to check calcs etc. I am working with a shop
> here in St Petersburg and have the base insert machined in plastic to 
> test.
> I need to finish the upper part on ACAD and will be off once I get the
> money. Just moved so I will have to find the right box with note  but have
> the ACAD files here on the computer.  Anyone interested?

When you're done, I'd be happy to host an article and the files on the
alberg30.org website, if you'd like.

> Also I have removed my A4 to refurb and ready to go back in-the exhaust
> "muffler" has leaks and I want to replace with SS pipe - the question is
> whether straight pipe will do and do I need something as a water stop or
> trap as it were to keep water making it to the engine. Any ideas or
> experience.

I'm skeptical that stainless provides any real advantage for the exhaust.

I've used the design shown on
http://alberg30.org/maintenance/MechanicalPropulsion/Exhaust/ in both
black iron and in "bronze" pipe. The iron exhaust pipe was fine for a
number of years and still had plenty of life left when the old exhaust
manifold and flange crumbled to nothing. I discarded it as not worth the
effort to salvage, the pipe being so cheap. I decided to make the
replacement in "bronze" (probably closer to brass or copper, I suspect)
since I decided to make the hose output out of a hose barb rather than a
pipe nipple. The pipe nipple is a tight fit for the hose, and I wanted
it easier to remove. (I used to drain the water-lift muffler. Now I run
antifreeze through.)

  - George

-- 
  ----------------------------------------------------------------------
   When I remember bygone days                         George Dinwiddie
   I think how evening follows morn;            gdinwiddie at alberg30.org
   So many I loved were not yet dead,           http://www.Alberg30.org
   So many I love were not yet born.                          also see:
                'The Middle' by Ogden Nash     http://idiacomputing.com
  ----------------------------------------------------------------------



_______________________________________________
These businesses support your Association:
http://www.alberg30.org/store/A30supporters.html
Please support them.
_______________________________________________
Public-List mailing list
Public-List at lists.alberg30.org
http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org 


 1349994444.0


More information about the Public-List mailing list