[Public-List] Stern squat.

[Glenn]

 Hey George what kind of Epoxy? Epoxy paint of some kind or just regular boat epoxy.

thanks 
Glenn brooks

Sent from my iPhone

On Feb 15, 2013, at 12:06 PM, George Dinwiddie <gdinwiddie at alberg30.org> wrote:

> And while you've got the cover off, paint the insides of the tank with epoxy.
> 
> On 2/15/13 12:19 PM, Mike Lehman wrote:
>> Drill out the rivets, remove the aluminum cover, make a new cover from
>> G10 epoxy sheet, install with screws and 5200...no more leaks and you
>> can drink the water without aluminum bits and white powder flakes in
>> your coffee! Install a charcoal filter too!
>> 
>> 
>> 
>> 
>> ~~~_/)_/)~~ Mike Lehman ~~_/)~~~
>> -----Original Message----- From: Gordon Laco
>> Sent: Friday, February 15, 2013 12:07 PM
>> To: Alberg 30 Public List -- open to all
>> Subject: Re: [Public-List] Stern squat.
>> 
>> We used to carry the tank around full for that purpose; but we've got the
>> old leaky top plate issue, so until I resolve that it's empty again....it
>> leaked when the boat was heeled over. Fixing the top of the tank is on the
>> list.
>> 
>> Gord Surprise #426
>> 
>> 
>> On 15/02/13 11:57 AM, "Mike Lehman" <sail_505 at hotmail.com> wrote:
>> 
>>> Why not just fill the water tank - 30 gallons at 8lb/gal is 240
>>> lbs...and it
>>> is below the water line. You don't have to drink it.
>>> 
>>> 
>>> 
>>> 
>>> ~~~_/)_/)~~ Mike Lehman ~~_/)~~~
>>> -----Original Message-----
>>> From: Gordon Laco
>>> Sent: Friday, February 15, 2013 11:31 AM
>>> To: j_l_brown ; Alberg 30 Public List -- open to all

 1360962392.0