[Public-List] Jyb track location on foredeck

[Bill Boyle]

Another solution is to have a sailmaker add some small battens.

Bill Boyle
 

________________________________
 From: Amy & David Swanson <zira at bellsouth.net>
To: Alberg 30 Public List -- open to all <public-list at lists.alberg30.org> 
Sent: Wednesday, January 29, 2014 5:44 PM
Subject: Re: [Public-List] Jyb track location on foredeck
  

Another thing you may be able to do, depending on the luff length of your 
jib, is add a short pendant to the tack.  This has the same effect on sail 
shape as moving the car forward.  The down side is that the center of effort 
moves up & back, meaning more heeling & more weather helm.  Usually not 
enough to be a problem though & if your sail is in decent shape otherwise...

David Swanson
Strayaway Child
Alberg 30 #229
----- Original Message ----- 
From: "Gordon Laco" <mainstay at csolve.net>
To: "Alberg 30 Public List -- open to all" <public-list at lists.alberg30.org>
Sent: Wednesday, January 29, 2014 5:14 PM
Subject: Re: [Public-List] Jyb track location on foredeck


> If you can't increase the leach tension by moving the jib sheet block
> further forward (the normal cure),  tighten the leach line on the sail. 
> If
> the sail is badly stretched it'll be tough to quiet it, in which case I'd
> have to say you need a new sail.
>
> It is possible to have the sailmaker cut a new more hollow leach, that may
> help, but not if the sail is past it's best before date....
>
> Gord #426 Surprise
>
>
> On 29/01/14 4:59 PM, "Bill Woodford" <williamwoodford at charleswoodford.com>
> wrote:
>
>> Excellent ideas.
>>
>> When I tried sheeting the 100% to the rail, I had so much flapping of the
>> leach that it drove me nuts.  (Granted, I had flapping of the leach when
>> sheeted inboard as well, but much less)  How does one correct the 
>> incessant
>> flapping?
>>
>>
>> On Wed, Jan 29, 2014 at 4:43 PM, Glenn Brooks 
>> <brooks.glenn at comcast.net>wrote:
>>
>>> Mike,
>>>
>>> 318 is definitely a transition boat - early 1968 build, no working jib
>>> tracks, toe rail mounted flush with the deck, but balsa core decks and
>>> cockpit. No Masonite coring anywhere that I have found.
>>>
>>> To bad I already stripped and refinished my interior. Sounds like the 
>>> jyb
>>> track could use a cleat or gusset of some sort fiber glassed under the 
>>> deck
>>> to the hull to reinforce the track. Similar to the forward lower
>>> chainplates.
>>>
>>> Glenn
>>> Dolce 318
>>>
>>> Sent from my iPad
>>>
>>>> On Jan 29, 2014, at 8:07 AM, "Meinhold, Michael J." <
>>> MICHAEL.J.MEINHOLD at leidos.com> wrote:
>>>>
>>>> I have used both one and two reefs and find it comfortably
>>>> weather-helmed close hauled.
>>>> I am usually too busy to measure my tacking angles consistently, but I
>>>> believe I tack tighter with the working jib and 2 reefs than with the 
>>>> #1
>>>> and 2 reefs.
>>>> I think that racing you would not be optimal with the working jib 
>>>> unless
>>>> you were in gale conditions, but I use it to make singlehanded sailing
>>>> safer and more pleasant.
>>>> The short sheets make tacking much easier, and the high cut makes
>>>> visibility to leeward much better.
>>>>
>>>> I am looking at the A30 sailplan and Alberg drew the working jib sheet
>>>> to a point just forward of the main cabin forward window. I would have
>>>> to look at my cars, but I think that's about where I have them.
>>>> Unfortunately there is no deck plan that I am aware of to locate them,
>>>> but let me know and I will measure mine out.
>>>>
>>>> I would guess #318 is a transitional boat - do you have standup or flat
>>>> toe-rails?
>>>>
>>>> Mike
>>>> Rinn Duin #272
>>>>
>>>> -----Original Message-----
>>>> From: public-list-bounces at lists.alberg30.org
>>>> [mailto:public-list-bounces at lists.alberg30.org] On Behalf Of Glenn
>>>> Brooks
>>>> Sent: Wednesday, January 29, 2014 10:54 AM
>>>> To: Alberg 30 Public List -- open to all
>>>> Subject: Re: [Public-List] Jyb track location on foredeck
>>>>
>>>> Hi Michael,
>>>>
>>>> Very interesting. How does your boat balance with the working jib?  Do
>>>> you usually sail with one reef or two with the jib?
>>>>
>>>> Thanks
>>>> Glenn
>>>>
>>>> Sent from my iPad
>>> _______________________________________________
>>> These businesses support your Association:
>>> http://www.alberg30.org/store/A30supporters.html
>>> Please support them.
>>> _______________________________________________
>>> Public-List mailing list
>>> Public-List at lists.alberg30.org
>>> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>>>
>> _______________________________________________
>> These businesses support your Association:
>> http://www.alberg30.org/store/A30supporters.html
>> Please support them.
>> _______________________________________________
>> Public-List mailing list
>> Public-List at lists.alberg30.org
>> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>
>
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org

_______________________________________________
These businesses support your Association:
http://www.alberg30.org/store/A30supporters.html
Please support them.
_______________________________________________
Public-List mailing list
Public-List at lists.alberg30.org
http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
 1391039327.0