[Public-List] Public-List Digest, Vol 2854, Issue 1

Rod via Public-List public-list at lists.alberg30.org
Wed Jul 16 15:30:49 PDT 2014


Bill;
Scientific stress tests are indeed a good place to start but I can't help wonder just how closely the carefully controlled lab conditions match the real world. 
You are right, it is most bewildering. 


Cheers,  Rod 

-------- Original message --------
From: Bill Newman via Public-List <public-list at lists.alberg30.org> 
Date:16/07/2014  5:26 PM  (GMT-05:00) 
To: public-list at lists.alberg30.org,public-list-request at lists.alberg30.org 
Subject: Re: [Public-List] Public-List Digest, Vol 2854, Issue 1 

Re: When to Replace Stuff



The problem with the marine issues is that there seem to be so many would be 
experts.  Any yacht club or marina will have dozens of people with opinions 
often stated with absolute conviction.  The opinions when rigging should be 
replaced, nicropress eyes, replaced immediately, swaged fittings subject to 
failure in a few years, etc. is very confusing.  A long time rigging man in 
Toronto told me some years ago that he has never seen or heard of a 
nicropress eye ever failing.  Of course it doesn't mean that it never 
happened.  How many swage fittings have failed?  Both need to be inspected 
periodically.  Intuitively, it seems to me that wire wrapped around a 
thimble and well-sealed at the bottom of the loop could be stronger than 
wire pushed into a tube and compressed but I am no engineer.  There must 
have been some scientific stress tests done on the subject.  What or who is 
to be believed?  I am sure that the marine suppliers would be pleased to 
replace almost everything on the boat every year.  Of course here on the 
Great Lake's freshwater, we are not subject to the corrosion problems of 
salt.  You can walk around any club or marina and usually tell what boats 
have been in salt water for a period of time.  Some years ago, having  spent 
10 months in salt water on the way to and back, Toronto to the Bahamas, with 
only the rain to periodically wash the salt away.  My boat was not an Alberg 
at that time, but it needed work when I got a back.



These are just my thoughts on the matter, over 40 years of sailing 
experience but making no claims to expertise, always learning.



Bill Newman

Marion Rose III, No. 233



----- Original Message ----- 
From: "via Public-List" <public-list at lists.alberg30.org>
To: <public-list at lists.alberg30.org>
Sent: Wednesday, July 16, 2014 1:26 PM
Subject: Public-List Digest, Vol 2854, Issue 1


> Send Public-List mailing list submissions to
> public-list at lists.alberg30.org
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> or, via email, send a message with subject or body 'help' to
> public-list-request at lists.alberg30.org
>
> You can reach the person managing the list at
> public-list-owner at lists.alberg30.org
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of Public-List digest..."
>
>
> Please do NOT include the entire digest in your reply!
> ======================================================
>
>
>
> Today's Topics:
>
>   1. 50th Anniversary Parade Boat Dress
>      (John Maliszewski via Public-List)
>   2. Re: Check that standing rigging-- especially this kind of
>      terminal (Eric Chavigny via Public-List)
>   3. Re: Check that standing rigging-- especially this kind of
>      terminal (Eric Chavigny via Public-List)
>   4. Play in rudder post (Wes Gardner via Public-List)
>   5. Re: Play in rudder post (George Dinwiddie via Public-List)
>   6. Re: Play in rudder post (Wes Gardner via Public-List)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Tue, 15 Jul 2014 15:21:16 -0400
> From: John Maliszewski via Public-List
> <public-list at lists.alberg30.org>
> To: <public-list at lists.alberg30.org>
> Subject: [Public-List] 50th Anniversary Parade Boat Dress
> Message-ID: <00ce01cfa062$3d1a0bb0$b74e2310$@verizon.net>
> Content-Type: text/plain; charset="US-ASCII"
>
> Folks, some of you have been asking about the Parade dress for the boats. 
> I
> have visited Bacon's and Fawcett's today to scout their inventory and here
> are couple of suggestions.
>
>
>
> -       Bacon's has 7 dress up flag strings (Nylon), 25 ft in length at
> $25.95 less 10% discount for A30 Association per Steve. An Alberg needs 2 
> of
> those to be dressed.
>
> -       Fawcett's has 4 full signal flag sets (TAY 93245) at $59.95 (List
> $86.49). One set would dress an A30.
>
>
>
> So for those that do not have them here are your choices.
>
>
>
> We still need boats for the parade, please let me know if you would like 
> to
> participate.
>
>
>
> Thanks, John.
>
>
>
>
>
> ------------------------------
>
> Message: 2
> Date: Tue, 15 Jul 2014 19:31:36 -0400
> From: Eric Chavigny via Public-List <public-list at lists.alberg30.org>
> To: "fongemie at gmail.com" <fongemie at gmail.com>, Alberg 30 Public List
> -- open to all <public-list at lists.alberg30.org>
> Cc: Randy Katz <randy.katz50 at gmail.com>
> Subject: Re: [Public-List] Check that standing rigging-- especially
> this kind of terminal
> Message-ID: <BAY403-EAS146D3717FEF7549140E7779F9F60 at phx.gbl>
> Content-Type: text/plain; charset="us-ascii"
>
> Try this web site, they have all the parts and necessary for that type of 
> crimping
>
> Eric
>
> A30 #541
>
>> On Jul 15, 2014, at 10:36, "Jeffrey via Public-List" 
>> <public-list at lists.alberg30.org> wrote:
>>
>> I'm unfamiliar with these fittings. Can anybody provide a link to a photo
>> of one??
>>
>> Does the fitting look like this?
>>
>> http://upload.wikimedia.org/wikipedia/commons/9/95/Wire_rope_with_thimble_and_ferrule.jpg
>>
>> -Jeff
>>
>>
>> Seagrass. #116
>> Boothbay Harbor, Maine
>> http://sailboatseagrass.com/
>>
>> <http://instagram.com/jfongemie>
>>
>>
>> On Mon, Jul 14, 2014 at 6:43 PM, Glenn Brooks via Public-List <
>> public-list at lists.alberg30.org> wrote:
>>
>>> Hi Randy,  your paint job sounds like it came out nice.  These nico 
>>> press
>>> fittings and thimble ends were the only wire you could get in Alaska 
>>> during
>>> the 70's and 80's- widely used and made up with no issues on hundreds if
>>> not thousands of sailboats and commercial fishing boats.  No one had
>>> swaging machines locally in those days, so this is all you could get. 
>>> My
>>> old 62' wood ketch was rigged this way, and also had some really old 
>>> hand
>>> made wire splices looped around the mast.  The thimbles and swagged
>>> fittings never failed, even when the wire strands started to break. 
>>> It's
>>> probably good to change them out, but there is plenty of history of
>>> successful service with this design and I am sure you where never at 
>>> risk -
>>> whereas swayed fittings (shipped in from Seattle) of that era failed
>>> regularly at a given age, and probably still do.   Sta lok or hi mod are
>>> undoubtedly superior to all, even though more way expensive.
>>>
>>> BTW, I saw a guy in Everett Marina today working on some sailboat 
>>> masthead
>>> with a small boom truck and gantry.  Owner was sunning himself on the 
>>> deck
>>> whilst the guy in the gantry replaced wires.  So at least one local 
>>> rigger
>>> makes house calls.
>>>
>>> Glenn
>>> Dolce 318
>>>
>>> Sent from my iPad
>>>
>>>>> On Jul 14, 2014, at 2:49 PM, Randy Katz via Public-List <
>>>> public-list at lists.alberg30.org> wrote:
>>>>
>>>> Greetings, All,
>>>>
>>>> Besides the painting upgrade, I was able to meet up with Don Yager of
>>> Yager
>>>> Sails  (in Spokane, WA. at http://www.yagersails.com/). He makes
>>> occasional
>>>> trips to Bellingham where we keep the boat, this time to deliver a new
>>> sail
>>>> to a customer there. He generously offered to take a look at my Profurl
>>> set
>>>> up to advise re: the life expectancy of the forestay.
>>>>
>>>> The forestay's good for a few more years, but he pointed out one thing
>>> that
>>>> I was REALLY glad to hear about-- this is especially relevant to some 
>>>> of
>>> us
>>>> with older boats. (Well, I guess that's ALL of us, eh?)
>>>>
>>>> While the lower ends of all the rigging had a variation of a Norseman
>>>> mechanical compression fitting, the upper ends nearly all consist of 
>>>> wire
>>>> wrapped around a SS thimble and crimped with Nico-press types of 
>>>> fitting.
>>>> Don declared these to be no-no's and dangerous, to replace right away.
>>> This
>>>> thought was seconded by Pete, the rigging expert at Fishery Supply in
>>>> Seattle. Raised eyebrows all around!
>>>>
>>>> So, we're dropping the mast tomorrow in order to remove all that stuff
>>> and
>>>> replace it with wire from Fisheries Supply. Chinese-made wire is,
>>>> apparently, to be completely avoided. US-made is best, though it can be
>>>> hard to find. (I checked with a dozen places in western WA and found 
>>>> one
>>> or
>>>> two sources: West Marine-- expensive-- and NW Rigging in Anacortes at
>>> about
>>>> half the price. Let me know if you'd like a copy of my notes about 
>>>> this.
>>> Or
>>>> photos of the fittings.)
>>>>
>>>> We're going with Fishery Supplies Korean wire made by KOS but stranded
>>>> together in the US. A good reputation, supposedly.
>>>>
>>>> You may want to check you own rigging to be sure you don't have those
>>>> crimped terminals. (The rigging is not original; it spent some years in
>>>> Portland, OR. before I bought it in 2000.)
>>>>
>>>> This puts the sailing trip back another week, but heck, I'm glad to 
>>>> know
>>> of
>>>> it. I can only imagine how lucky we've been, having sailed through all
>>>> kinds of weather with those fittings over the last dozen years!
>>>>
>>>> Best Regards,
>>>>
>>>> Randy Katz
>>>> #249 Simple Gifts
>>>> Bellingham/Seattle
>>>> _______________________________________________
>>>> These businesses support your Association:
>>>> http://www.alberg30.org/store/A30supporters.html
>>>> Please support them.
>>>> _______________________________________________
>>>> Public-List mailing list
>>>> Public-List at lists.alberg30.org
>>>> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>>> _______________________________________________
>>> These businesses support your Association:
>>> http://www.alberg30.org/store/A30supporters.html
>>> Please support them.
>>> _______________________________________________
>>> Public-List mailing list
>>> Public-List at lists.alberg30.org
>>> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>>
>>
>>
>> -- 
>> ______________
>>
>> Jeffrey Fongemie
>>
>> <http://instagram.com/jfongemie>
>> _______________________________________________
>> These businesses support your Association:
>> http://www.alberg30.org/store/A30supporters.html
>> Please support them.
>> _______________________________________________
>> Public-List mailing list
>> Public-List at lists.alberg30.org
>> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>
>
> ------------------------------
>
> Message: 3
> Date: Tue, 15 Jul 2014 19:38:13 -0400
> From: Eric Chavigny via Public-List <public-list at lists.alberg30.org>
> To: Eric Chavigny <eric.chavigny at hotmail.com>, Alberg 30 Public List
> -- open to all <public-list at lists.alberg30.org>
> Cc: Randy Katz <randy.katz50 at gmail.com>
> Subject: Re: [Public-List] Check that standing rigging-- especially
> this kind of terminal
> Message-ID: <BAY403-EAS321561D19D94F6539B8AFE4F9F60 at phx.gbl>
> Content-Type: text/plain; charset="us-ascii"
>
> http://www.webriggingsupply.com/pages/catalog/hardware/hardware-intro.html
>
> better like that !
>
>> On Jul 15, 2014, at 19:31, "Eric Chavigny via Public-List" 
>> <public-list at lists.alberg30.org> wrote:
>>
>> Try this web site, they have all the parts and necessary for that type of 
>> crimping
>>
>> Eric
>>
>> A30 #541
>>
>>> On Jul 15, 2014, at 10:36, "Jeffrey via Public-List" 
>>> <public-list at lists.alberg30.org> wrote:
>>>
>>> I'm unfamiliar with these fittings. Can anybody provide a link to a 
>>> photo
>>> of one??
>>>
>>> Does the fitting look like this?
>>>
>>> http://upload.wikimedia.org/wikipedia/commons/9/95/Wire_rope_with_thimble_and_ferrule.jpg
>>>
>>> -Jeff
>>>
>>>
>>> Seagrass. #116
>>> Boothbay Harbor, Maine
>>> http://sailboatseagrass.com/
>>>
>>> <http://instagram.com/jfongemie>
>>>
>>>
>>> On Mon, Jul 14, 2014 at 6:43 PM, Glenn Brooks via Public-List <
>>> public-list at lists.alberg30.org> wrote:
>>>
>>>> Hi Randy,  your paint job sounds like it came out nice.  These nico 
>>>> press
>>>> fittings and thimble ends were the only wire you could get in Alaska 
>>>> during
>>>> the 70's and 80's- widely used and made up with no issues on hundreds 
>>>> if
>>>> not thousands of sailboats and commercial fishing boats.  No one had
>>>> swaging machines locally in those days, so this is all you could get. 
>>>> My
>>>> old 62' wood ketch was rigged this way, and also had some really old 
>>>> hand
>>>> made wire splices looped around the mast.  The thimbles and swagged
>>>> fittings never failed, even when the wire strands started to break. 
>>>> It's
>>>> probably good to change them out, but there is plenty of history of
>>>> successful service with this design and I am sure you where never at 
>>>> risk -
>>>> whereas swayed fittings (shipped in from Seattle) of that era failed
>>>> regularly at a given age, and probably still do.   Sta lok or hi mod 
>>>> are
>>>> undoubtedly superior to all, even though more way expensive.
>>>>
>>>> BTW, I saw a guy in Everett Marina today working on some sailboat 
>>>> masthead
>>>> with a small boom truck and gantry.  Owner was sunning himself on the 
>>>> deck
>>>> whilst the guy in the gantry replaced wires.  So at least one local 
>>>> rigger
>>>> makes house calls.
>>>>
>>>> Glenn
>>>> Dolce 318
>>>>
>>>> Sent from my iPad
>>>>
>>>>>> On Jul 14, 2014, at 2:49 PM, Randy Katz via Public-List <
>>>>> public-list at lists.alberg30.org> wrote:
>>>>>
>>>>> Greetings, All,
>>>>>
>>>>> Besides the painting upgrade, I was able to meet up with Don Yager of
>>>> Yager
>>>>> Sails  (in Spokane, WA. at http://www.yagersails.com/). He makes
>>>> occasional
>>>>> trips to Bellingham where we keep the boat, this time to deliver a new
>>>> sail
>>>>> to a customer there. He generously offered to take a look at my 
>>>>> Profurl
>>>> set
>>>>> up to advise re: the life expectancy of the forestay.
>>>>>
>>>>> The forestay's good for a few more years, but he pointed out one thing
>>>> that
>>>>> I was REALLY glad to hear about-- this is especially relevant to some 
>>>>> of
>>>> us
>>>>> with older boats. (Well, I guess that's ALL of us, eh?)
>>>>>
>>>>> While the lower ends of all the rigging had a variation of a Norseman
>>>>> mechanical compression fitting, the upper ends nearly all consist of 
>>>>> wire
>>>>> wrapped around a SS thimble and crimped with Nico-press types of 
>>>>> fitting.
>>>>> Don declared these to be no-no's and dangerous, to replace right away.
>>>> This
>>>>> thought was seconded by Pete, the rigging expert at Fishery Supply in
>>>>> Seattle. Raised eyebrows all around!
>>>>>
>>>>> So, we're dropping the mast tomorrow in order to remove all that stuff
>>>> and
>>>>> replace it with wire from Fisheries Supply. Chinese-made wire is,
>>>>> apparently, to be completely avoided. US-made is best, though it can 
>>>>> be
>>>>> hard to find. (I checked with a dozen places in western WA and found 
>>>>> one
>>>> or
>>>>> two sources: West Marine-- expensive-- and NW Rigging in Anacortes at
>>>> about
>>>>> half the price. Let me know if you'd like a copy of my notes about 
>>>>> this.
>>>> Or
>>>>> photos of the fittings.)
>>>>>
>>>>> We're going with Fishery Supplies Korean wire made by KOS but stranded
>>>>> together in the US. A good reputation, supposedly.
>>>>>
>>>>> You may want to check you own rigging to be sure you don't have those
>>>>> crimped terminals. (The rigging is not original; it spent some years 
>>>>> in
>>>>> Portland, OR. before I bought it in 2000.)
>>>>>
>>>>> This puts the sailing trip back another week, but heck, I'm glad to 
>>>>> know
>>>> of
>>>>> it. I can only imagine how lucky we've been, having sailed through all
>>>>> kinds of weather with those fittings over the last dozen years!
>>>>>
>>>>> Best Regards,
>>>>>
>>>>> Randy Katz
>>>>> #249 Simple Gifts
>>>>> Bellingham/Seattle
>>>>> _______________________________________________
>>>>> These businesses support your Association:
>>>>> http://www.alberg30.org/store/A30supporters.html
>>>>> Please support them.
>>>>> _______________________________________________
>>>>> Public-List mailing list
>>>>> Public-List at lists.alberg30.org
>>>>> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>>>> _______________________________________________
>>>> These businesses support your Association:
>>>> http://www.alberg30.org/store/A30supporters.html
>>>> Please support them.
>>>> _______________________________________________
>>>> Public-List mailing list
>>>> Public-List at lists.alberg30.org
>>>> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>>>
>>>
>>>
>>> -- 
>>> ______________
>>>
>>> Jeffrey Fongemie
>>>
>>> <http://instagram.com/jfongemie>
>>> _______________________________________________
>>> These businesses support your Association:
>>> http://www.alberg30.org/store/A30supporters.html
>>> Please support them.
>>> _______________________________________________
>>> Public-List mailing list
>>> Public-List at lists.alberg30.org
>>> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>> _______________________________________________
>> These businesses support your Association:
>> http://www.alberg30.org/store/A30supporters.html
>> Please support them.
>> _______________________________________________
>> Public-List mailing list
>> Public-List at lists.alberg30.org
>> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>
>
> ------------------------------
>
> Message: 4
> Date: Wed, 16 Jul 2014 11:26:47 -0400
> From: Wes Gardner via Public-List <public-list at lists.alberg30.org>
> To: "Public-List at lists.alberg30.org" <Public-List at lists.alberg30.org>
> Subject: [Public-List] Play in rudder post
> Message-ID: <D044D539-1116-4728-9012-8FFA944151B6 at gmail.com>
> Content-Type: text/plain; charset=us-ascii
>
> Het All,
>
> I just hauled my boat and of course there is ++some++ play! maybe an 
> eighth of an inch. Seems with this I can wait a while?
>
> Wes
>
> Sent from my iPad
>
> ------------------------------
>
> Message: 5
> Date: Wed, 16 Jul 2014 13:18:36 -0400
> From: George Dinwiddie via Public-List
> <public-list at lists.alberg30.org>
> To: public-list at lists.alberg30.org
> Subject: Re: [Public-List] Play in rudder post
> Message-ID: <53C6B3EC.4040907 at alberg30.org>
> Content-Type: text/plain; charset=ISO-8859-1; format=flowed
>
> Wes
>
> On 7/16/14, 11:26 AM, Wes Gardner via Public-List wrote:
>> Het All,
>>
>> I just hauled my boat and of course there is ++some++ play! maybe an
>> eighth of an inch. Seems with this I can wait a while?
>
> While you've got it out, I would pull the rudder shoe off and take a
> look. It's not that hard to do.
>  1. 1/8" is a fair percentage of a half-inch pin
>  2. It may not be the pin that's limiting the motion. The first time I
> checked mine, the pin was *completely gone*. The bottom rudder post had
> worn into the shoe, limiting the movement to ~3/16".
>
> See http://alberg30.org/maintenance/Steering/RudderShoe/ for more 
> thoughts.
>
>  - George
>
> -- 
>  ----------------------------------------------------------------------
>   When I remember bygone days                         George Dinwiddie
>   I think how evening follows morn;            gdinwiddie at alberg30.org
>   So many I loved were not yet dead,           http://www.Alberg30.org
>   So many I love were not yet born.                          also see:
>                'The Middle' by Ogden Nash     http://idiacomputing.com
>  ----------------------------------------------------------------------
>
>
>
>
>
> ------------------------------
>
> Message: 6
> Date: Wed, 16 Jul 2014 13:26:50 -0400
> From: Wes Gardner via Public-List <public-list at lists.alberg30.org>
> To: George Dinwiddie <gdinwiddie at alberg30.org>, Alberg 30 Public List
> -- open to all <public-list at lists.alberg30.org>
> Subject: Re: [Public-List] Play in rudder post
> Message-ID: <CD9EFFC0-7BAC-4C44-B87D-7E8979D5E485 at gmail.com>
> Content-Type: text/plain; charset=us-ascii
>
> Just an anecdotal question, anyone actually have any experience when the 
> pin does fail? I've had steering cable part (when a 45' boat T-bones a 60' 
> boat you stop rather abruptly and tend to bend things up) and I've had a 
> blade come off a folding prop, makes things shake rather dramatically 
> until the engine is stopped ( not on an Alberg), but I've not had the 
> pleasure of having the bottom pin let go, just wondering if there's any 
> first hand knowledge out there?
>
> Wes
>
> Sent from my iPad
>
>> On Jul 16, 2014, at 1:18 PM, George Dinwiddie via Public-List 
>> <public-list at lists.alberg30.org> wrote:
>>
>> Wes
>>
>>> On 7/16/14, 11:26 AM, Wes Gardner via Public-List wrote:
>>> Het All,
>>>
>>> I just hauled my boat and of course there is ++some++ play! maybe an
>>> eighth of an inch. Seems with this I can wait a while?
>>
>> While you've got it out, I would pull the rudder shoe off and take a 
>> look. It's not that hard to do.
>> 1. 1/8" is a fair percentage of a half-inch pin
>> 2. It may not be the pin that's limiting the motion. The first time I 
>> checked mine, the pin was *completely gone*. The bottom rudder post had 
>> worn into the shoe, limiting the movement to ~3/16".
>>
>> See http://alberg30.org/maintenance/Steering/RudderShoe/ for more 
>> thoughts.
>>
>> - George
>>
>> -- 
>> ----------------------------------------------------------------------
>>  When I remember bygone days                         George Dinwiddie
>>  I think how evening follows morn;      gdinwiddie at alberg30.org
>>  So many I loved were not yet dead,           http://www.Alberg30.org
>>  So many I love were not yet born.                          also see:
>>               'The Middle' by Ogden Nash     http://idiacomputing.com
>> ----------------------------------------------------------------------
>>
>>
>>
>> _______________________________________________
>> These businesses support your Association:
>> http://www.alberg30.org/store/A30supporters.html
>> Please support them.
>> _______________________________________________
>> Public-List mailing list
>> Public-List at lists.alberg30.org
>> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>
>
> ------------------------------
>
> Subject: Digest Footer
>
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>
>
> ------------------------------
>
> End of Public-List Digest, Vol 2854, Issue 1
> ******************************************** 

_______________________________________________
These businesses support your Association:
http://www.alberg30.org/store/A30supporters.html
Please support them.
_______________________________________________
Public-List mailing list
Public-List at lists.alberg30.org
http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org



More information about the Public-List mailing list