[Public-List] Alberg 30 boom gooseneck

[GLENN P via Public-List]

Kristian, 

dont know much about the original boom goose neck fittings, but in a pinch you could call NW Rigging in Anacortes, Wa. They are quite reputable and could advise you about what's available in the market place these days. 

It would be good to know what you find out... 

glenn B 
Dolce 318 ( in Everett) 

----- Original Message -----

From: "Kristian Larson via Public-List" <public-list at lists.alberg30.org> 
To: "Alberg 30 Public List -- open to all" <public-list at lists.alberg30.org> 
Sent: Wednesday, July 23, 2014 2:52:19 PM 
Subject: [Public-List] Alberg 30 boom gooseneck 

Hi, 
After stripping the paint off Mara's boom I discovered a large crack in the 
gooseneck right above where the old roller furling crank handle would have 
attached. Has anyone on here had this issue and if so what solution to it 
did you find.? 
My immediate thought is to weld it but I'm not sure if this would work 
here...? 
Is there a source for new goosenecks that fit the original boom? 
Any help it troubleshooting this matter would be greatly appreciated. 

Thanks, 
Kristian Larson 
Mara #127 
Squamish BC 
_______________________________________________ 
These businesses support your Association: 
http://www.alberg30.org/store/A30supporters.html 
Please support them. 
_______________________________________________ 
Public-List mailing list 
Public-List at lists.alberg30.org 
http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org 


 1406152985.0