[Public-List] Alberg 30 boom gooseneck

[Randall Holliday via Public-List]

Hi Kristian,
Can you please keep us in the loop on this as well as post a picture of the
crack?

Randall
Mahseer #380
ᐧ


Randall Holliday CD




On Wed, Jul 23, 2014 at 5:52 PM, Kristian Larson via Public-List <
public-list at lists.alberg30.org> wrote:

> Hi,
> After stripping the paint off Mara's boom I discovered a large crack in the
> gooseneck right above where the old roller furling crank handle would have
> attached.  Has anyone on here had this issue and if so what solution to it
> did you find.?
> My immediate thought is to weld it but I'm not sure if this would work
> here...?
> Is there a source for new goosenecks that fit the original boom?
> Any help it troubleshooting this matter would be greatly appreciated.
>
> Thanks,
> Kristian Larson
> Mara #127
> Squamish BC
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>

 1406154881.0