[Public-List] Re-bedding cockpit coamings

[George Dinwiddie]

Jonathan,

On 3/24/14, 10:41 AM, Jonathan Adams wrote:
> All,
>
> After all the discussion a few months ago about getting the coamings
> off, I took mine off - very hard in cold weather when 5200 was used
> to bed it down. I go thtem all off in one piece, although I imagine
> that it is not hard to split things if you try and go too fast.
>
> Anyway - time to put them back on. Mike L is a fan of the 4000
> sealant over 5200 as it has a UV protection the others do not have.
> Any other suggestions? Any advice in general. These ones are getting
> so thin versus what they were originally, this i sprobably the last
> time they come off in one piece!

I used neoprene gaskets, and then a bead of caulking along the 
deck/coaming joint.

  - George

-- 
  ----------------------------------------------------------------------
   When I remember bygone days                         George Dinwiddie
   I think how evening follows morn;            gdinwiddie at alberg30.org
   So many I loved were not yet dead,           http://www.Alberg30.org
   So many I love were not yet born.                          also see:
                'The Middle' by Ogden Nash     http://idiacomputing.com
  ----------------------------------------------------------------------




 1395678159.0