[Public-List] Paint Spreader Tops

[Mike Lehman]

Bright side white. You can prime first if you are worried about adhesion. I may have some system 3 yacht primer...it is the best without equal.

--- Original Message ---

From: "Meinhold, Mike J." <MICHAEL.J.MEINHOLD at leidos.com>
Sent: May 12, 2014 10:55 AM
To: "Alberg 30 Public List -- open to all (public-list at lists.alberg30.org)" <public-list at lists.alberg30.org>
Subject: [Public-List] Paint Spreader Tops

I want to paint the tops of my spreaders this weekend at Maintenance Weekend.

They are solid teak and got 10 coats of Epifanes clear varnish 2 years ago when they were new.

What paint would be recommended for a good bond on top of the varnish  ?  I assume I would rough it up and put on two coats.


Mike
Rinn Duin #272

_______________________________________________
These businesses support your Association:
http://www.alberg30.org/store/A30supporters.html
Please support them.
_______________________________________________
Public-List mailing list
Public-List at lists.alberg30.org
http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org