[Public-List] Paint Spreader Tops

[Gordon Laco]

For wood?

Gord #426 Surprise


On 12/05/14 11:02 AM, "Mike Lehman" <sail_505 at hotmail.com> wrote:

> Bright side white. You can prime first if you are worried about adhesion. I
> may have some system 3 yacht primer...it is the best without equal.
> 
> --- Original Message ---
> 
> From: "Meinhold, Mike J." <MICHAEL.J.MEINHOLD at leidos.com>
> Sent: May 12, 2014 10:55 AM
> To: "Alberg 30 Public List -- open to all (public-list at lists.alberg30.org)"
> <public-list at lists.alberg30.org>
> Subject: [Public-List] Paint Spreader Tops
> 
> I want to paint the tops of my spreaders this weekend at Maintenance Weekend.
> 
> They are solid teak and got 10 coats of Epifanes clear varnish 2 years ago
> when they were new.
> 
> What paint would be recommended for a good bond on top of the varnish  ?  I
> assume I would rough it up and put on two coats.
> 
> 
> Mike
> Rinn Duin #272
> 
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org