[Public-List] Portlights & toe rails.

Jeffrey via Public-List public-list at lists.alberg30.org
Fri Oct 3 15:24:20 PDT 2014


Glenn,

Would you have any pictures of your bulwarks?  That sounds like an
interesting project. What species of wood did you use?

jeff

Seagrass. #116
Boothbay Harbor, Maine
http://sailboatseagrass.com/

<http://instagram.com/jfongemie>

On Fri, Oct 3, 2014 at 6:13 PM, Glenn via Public-List <
public-list at lists.alberg30.org> wrote:

> Greg
> Are you asking about the actual window material?  If so, I replaced
> everything on Dolce with polycarbonate, same thickness as the cabin sides,
> bedded all around with Dolphinite.  Maybe 1/4" or 5/16" can't remember. But
> make it the same thickness as the cabin wall.
>
> I replaced my toe rails with 4" bulwarks capped with teak a couple of
> years ago.  I like the extra foot hold and security whilst walking along
> the deck.  The deck is cambered so the bottom of the rail or bulwark needs
> to be planed on an angle   to sit upright when bolted back down.  I lifted
> angles of the deck camber every foot then laid out the pattern on a 30' loa
> strip of plywood mounted on saw horses.  That became my workbench to shape
> the bulwarks.  Toe rails could be done the same, then rounded to shape on
> top with a hand held power planner.
>
> Alternatively Most marine suppliers can order aluminum toe rail.  You
> would need to figure out the transitions with the raised wooden piece at
> the stem head and wood taff rail, and some minor deck molding where cut
> waters exist in the toerail.
>
> Glenn Brooks
> Dolce 318
>
>
>
>
> Sent from my iPhone
>
> > On Oct 3, 2014, at 2:14 PM, Greg Dawson via Public-List <
> public-list at lists.alberg30.org> wrote:
> >
> >
> > Hi there.
> >
> > Has anyone replaced their portlights? What material did you use and how
> thick was it?
> >
> > Also, has anyone replaced their toe rails? the wood work on my 1968
> Alberg isn't great and I am thinking of changing to Aluminium rails. Does
> anyone know of a good supplier or have any advice please.
> >
> > Greg,
> >
> > Good hope #348
> > _______________________________________________
> > These businesses support your Association:
> > http://www.alberg30.org/store/A30supporters.html
> > Please support them.
> > _______________________________________________
> > Public-List mailing list
> > Public-List at lists.alberg30.org
> > http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>



-- 
______________

Jeffrey Fongemie

<http://instagram.com/jfongemie>

 1412375060.0


More information about the Public-List mailing list