[Public-List] Suggestions for pulling out injectors?

Eric Chavigny via Public-List public-list at lists.alberg30.org
Wed Apr 6 15:15:24 PDT 2016


Hi, 

When we bought Dimanche Matin #541, the engine was not working properly and I found that one of the injector was not spraying properly.  I removed the injector and send them to a injector specialist here in Montreal.  

It was found that parts within the injectors had been mixed up during maintenance by previous owner.  The shop was able to put them back properly after trying all the possible variation $$$$

Now everything works fine.  My advise is make sure that you separte every parts for each injector and reassemble them exactly the same way they were. These parts are machined to fit together for each injector. if you decide to venture in this area.  Otherwise a good diesel shop can verify the injector for you.

Hope that help

> On Apr 6, 2016, at 11:23, Randy Katz via Public-List <public-list at lists.alberg30.org> wrote:
> 
> Greetings,
> 
> I'd like to pull out the 3 injectors on my Universal M3-20B diesel this
> weekend. They have been in place since the engine was installed new in
> about 2000, 1300 hours ago.
> 
> I'm expecting this job to be challenging. Westerbeke (maker of the engine)
> recommends two special proprietary tools, which I'm investigating. I have
> an understanding of various formulae and commercially available products
> for dealing with stuck threads, but I wonder if any of you with experience
> might have any other advice.
> 
> At this point, I'm assuming heat can't be used due to the presence of fuel
> and the sensitive nature of injector mechanics.
> 
> Thanks in advance for your help!
> 
> Randy Katz
> Simple Gifts #249
> Bellingham/Seattle
> 
> 
> 
> 
> 從我的 iPad 傳送
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org


More information about the Public-List mailing list