[Public-List] Spinnaker rigging

[Wes Gardner via Public-List]

Just FYI, I bought a bunch of 5/16" double braid on Amazon for pretty cheap. It's not easily splicable but works for my asym for both sheets and the tack line.

Sent from my iPad

> On Aug 13, 2016, at 11:29 PM, Hernán Scarnichia via Public-List <public-list at lists.alberg30.org> wrote:
> 
> Hi,
> I'm setting up #414 for flying a spinnaker (symmetrical) and have some
> questions for those on the list that use their spinnakers.
> 
> I'm planning on using single sheets (the lazy sheet is the guy) and
> tweakers / barber haulers. the sheet and guy will run to blocks on the
> stern quarter and to the after winches and the tweakers will go to the
> forward winches.
> 
> Will the downward pull of the tweaker on the guy be enough to keep the pole
> down or do I need a separate downhaul / foreguy? where on the foredeck do
> you attach the downhaul / foreguy if needed?
> 
> Would 1/4" sheets and tweakers be enough? this would be for light winds
> less than 10-15kt
> 
> The recommendations online are for 2x boat length sheets. does this work ok
> in an alberg 30?
> 
> Thanks for your wisdom
> 
> Hernan
> #414
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org