[Public-List] Peg Board upgrades

[Wes Gardner via Public-List]

Mr skeep,

Regarding insulation, if it's sprayed in urethane, like the high-end stuff
they squirt into the wall cavity of houses these days, that stuff fully
adheres and I suspect would NOT present a problem.  I've seen folks lay in
panels of various types of rigid foam (both styro and the blue stuff), id'
be curious as to whether that can trap moisture...

Wes

On Mon, Dec 12, 2016 at 9:09 AM, Bill McCoy via Public-List <
public-list at lists.alberg30.org> wrote:

> Interesting.  Well, I've already removed one in the v-berth for sizing.  I
> don't think I will continue with the peg board.
>
>
> Instead, am going to use an insulation against the hull and then probably
> use cedar strips to lay-up against the wooden supports with the intent that
> it will assist with both cold and hot effects during the year.
>
>
> I figure some of you have already done this.  Any advice?  Would you think
> this is unnecessary for creature comfort?  Is there an issue with possible
> moldy developments?
>
>
> skeep
>
>
> ________________________________
>
> From: Public-List <public-list-bounces at lists.alberg30.org> on behalf of
> via Public-List <public-list at lists.alberg30.org>
> Sent: Sunday, December 11, 2016 3:07 PM
> To: public-list at lists.alberg30.org
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>