[Public-List] Mast Support Beam

[Bill Boyle via Public-List]

Same guy must have fixed our mast beam.  I have the identical aluminum plate.

Bill BoyleSlainte 129

      From: Wes Gardner via Public-List <public-list at lists.alberg30.org>
 To: "public-list at lists.alberg30.org" <public-list at lists.alberg30.org> 
 Sent: Monday, February 8, 2016 12:53 PM
 Subject: [Public-List] Mast Support Beam
   
Hi All,

My boat is a non-liner boat #196.  The mast support beam has been
reinforced with aluminum plate on both sides of the beam.  Looking at the
photo that looks forward, there IS a flat spot in the cabin top.  I’m not
sure whether I’m concerned about it or not.  In that same photo, there are
four nuts that hold a fairly substantial pad-eye plate near the base of the
mast.  You can see the pad eye with a single Harken block in the photo of
the mast base.  If I eye-ball one against the other, it tells me my mast is
resting fairly square on the beam (meaning it’s not too far forward or
aft.)  Also when I “sound” with my plastic hammer, everything is rock solid
as far as the core is concerned.  The other photo of the reinforcing plate
looking aft, although it’s not pretty, there are no leaks.

I think I’m content to leave things alone.  Any comments and/or suggestions
are always welcome.

https://www.dropbox.com/s/1nbw95vyxmuxify/Mast%20Support%20Beam.jpg?dl=0
https://www.dropbox.com/s/7nat262in0euf3w/Mast%20Base.jpg?dl=0
https://www.dropbox.com/s/q8hsrt2m5603vy6/Mast%20Support%20Fwd%20Side.jpg?dl=0


Wes #196 Griffin’s Faith
_______________________________________________
These businesses support your Association:
http://www.alberg30.org/store/A30supporters.html
Please support them.
_______________________________________________
Public-List mailing list
Public-List at lists.alberg30.org
http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org