[Public-List] Question on removal of sliding hatch on 1977 Alberg

[vmarmei via Public-List]

If I may say sooo.....You have to unscrew the metal track and lift 
the whole hatch off. There is a Hatch Stop inside to stop the forward 
travel of the hatch. Some times it helps to unscrew one side of the 
track only and slide the hatch off sidewise.
Villo A-30 Canada


At 09:35 AM 15/07/2016, you wrote:
>After exhausting my limited knowledge of basic cabinetry I would 
>like guidance on how I might remove the sliding hatch cover on my 
>Alberg so that I might work on the teak surface in a protected 
>environment which is not 100 degrees.  I have removed the forward 
>"turtle" protective cuddy yet cannot determine where the secret 
>notch is which will permit me to extract the sliding hatch.
>
>Skeep
>Hull #614
>
>_______________________________________________
>These businesses support your Association:
>http://www.alberg30.org/store/A30supporters.html
>Please support them.
>_______________________________________________
>Public-List mailing list
>Public-List at lists.alberg30.org
>http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>
>
>-----
>No virus found in this message.
>Checked by AVG - www.avg.com
>Version: 2016.0.7640 / Virus Database: 4627/12619 - Release Date: 07/15/16