[Public-List] furling gear and spinnaker halyard

[Jonathan Bresler via Public-List]

Americo,

Will have to get some.
Just checked the phone.
Didnt take any of the jib halyard during the last trip up the mast.

The Selden PDF, referenced earlier, has diagrams that may help.

Jonathan

On Fri, Jun 24, 2016 at 4:37 PM, americo silva via Public-List <
public-list at lists.alberg30.org> wrote:

> hi From Cassandra #182
> Could you possibly put some pics on
> I'm looking into putting a spinnaker setup too
>
> On Thu, Jun 23, 2016 at 7:43 PM, Kris Coward via Public-List <
> public-list at lists.alberg30.org> wrote:
>
> >
> > Put a halyard restrainer on the front of the mast to help keep the jib
> > and spin halyards clear enough of each other to keep this problem at
> > bay. I figured this one out the hard way (by breaking the forestay with
> > (jib) halyard wrap before putting the restrainer on--fortunately I was
> > able to rig up the spare halyard as an emergency forestay before the rig
> > got any ideas about falling over).
> >
> > -Kris
> >
> > On Thu, Jun 23, 2016 at 03:39:13PM -0400, charles pleisse via Public-List
> > wrote:
> > > Sookie has a spinnaker and most of the associated gear.  It all seems
> to
> > be
> > > original to the boat.  Furling gear was installed in the mid 80's.  I
> > > believe the spinnaker hasn't been used since.  I discovered why last
> > year.
> > > As many of you probably know, the spinnaker halyard interferes with the
> > > upper parts of the furling gear.  Is there any way to rig a spinnaker
> > > halyard on an original mast head that will not interfere with the
> furler?
> > >
> > > Charles Pleisse
> > > Sookie #221
> > > _______________________________________________
> > > These businesses support your Association:
> > > http://www.alberg30.org/store/A30supporters.html
> > > Please support them.
> > > _______________________________________________
> > > Public-List mailing list
> > > Public-List at lists.alberg30.org
> > > http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> >
> > --
> > Kris Coward                                     http://unripe.melon.org/
> > GPG Fingerprint: 2BF3 957D 310A FEEC 4733  830E 21A4 05C7 1FEB 12B3
> > _______________________________________________
> > These businesses support your Association:
> > http://www.alberg30.org/store/A30supporters.html
> > Please support them.
> > _______________________________________________
> > Public-List mailing list
> > Public-List at lists.alberg30.org
> > http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> >
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>



-- 
Jonathan M Bresler
S/V Constance Alberg 30 #262
Annapolis/Eastport MD