[Public-List] Rudder Core Material

[David Van Denburgh via Public-List]

Mine are 1/2". 

Sent from my iPhone

> On May 30, 2016, at 8:27 PM, MG via Public-List <public-list at lists.alberg30.org> wrote:
> 
> Could I trouble some-one to tell me the size of the Turnbuckle for the
> stays?
> 
> Thanks,
> Mark
> 
> 
> On Fri, May 27, 2016 at 7:13 PM, Justin Riddle via Public-List <
> public-list at lists.alberg30.org> wrote:
> 
>> Hi Albergers,
>> I've discovered delamination in the rudder.
>> https://goo.gl/photos/FB74t3mwGFGCWQ2YA
>> 
>> What sort of coring material do you think would be good to build this back
>> up before glassing? I was thinking West System 406 thickened up pretty
>> well.
>> 
>> Thoughts?
>> 
>> Thanks!
>> Justin
>> Hiraeth #498
>> _______________________________________________
>> These businesses support your Association:
>> http://www.alberg30.org/store/A30supporters.html
>> Please support them.
>> _______________________________________________
>> Public-List mailing list
>> Public-List at lists.alberg30.org
>> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org