[Public-List] Continued Fitment questions on Boom Vang choice

Wes Gardner via Public-List public-list at lists.alberg30.org
Thu Nov 3 06:39:43 PDT 2016


Oh, the hard vangs MAY require a fixed point goose neck???  Mine is still
on a track.

On Thu, Nov 3, 2016 at 9:36 AM, Wes Gardner <wesgardner1952 at gmail.com>
wrote:

> Here's mine...just a simple arrangement of blocks led back to the
> cockpit.  In fact it is was cobbled together by a PO use a mast bail and a
> boom bail.  It's the white line, the blue one is the tack line for the asym.
>
> On Thu, Nov 3, 2016 at 9:17 AM, Don Campbell via Public-List <
> public-list at lists.alberg30.org> wrote:
>
>> Bill:
>>    I know of two Alberg 30's that have Garhauer vangs. Both are in the
>> Canadian race fleet and the one is still in the box because the first one
>> went on and tore the track off the mast that held the boom. Garhauer made a
>> bracket for the boom fitting so that that boom now does not move on the
>> mast. As far as I know, Phil really likes his set up and I will eventually
>> get around to replacing the cloth vang I have, with the one in the box,
>> once I figure out where to put the boom on the mast.  If you do get a
>> Garhauer, make sure you get the mast bracket too. They are a small enough
>> company that they should be able to make the same one that was made for
>> Gemini, # 362 and that was for the stock mast.
>> Don
>>
>> -----Original Message----- From: Bill McCoy via Public-List
>> Sent: Thursday, November 03, 2016 7:08 AM
>> To: public-list at lists.alberg30.org
>> Subject: [Public-List] Continued Fitment questions on Boom Vang choice
>>
>>
>> So Hull 614 is back in the water.  This time in South Carolina.  Photo at
>> link:
>>
>>
>> [IMG]http://i1358.photobucket.com/albums/q763/Skeep575/DSC_0
>> 479_zpsy8voe1sf.jpg[/IMG][/URL]
>>
>>
>> Update discussion threads on Boom Vangs.  I've read the old posts about
>> these.
>>
>>
>> Questions for the hearty:  1) For the Alberg, is there a consensus on
>> type vang, blocks or rigid styles?  I'm referring to any sort of setup.
>>
>>
>> 2) Garhauer was mentioned as supplying for Albergs specifically.  Is this
>> still the case that they are tuned-in to our design for boom vang fitment?
>>
>>
>> Thanks all,
>>
>> skeep
>>
>>
>>
>>
>> Bill
>> _______________________________________________
>> These businesses support your Association:
>> http://www.alberg30.org/store/A30supporters.html
>> Please support them.
>> _______________________________________________
>> Public-List mailing list
>> Public-List at lists.alberg30.org
>> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>> _______________________________________________
>> These businesses support your Association:
>> http://www.alberg30.org/store/A30supporters.html
>> Please support them.
>> _______________________________________________
>> Public-List mailing list
>> Public-List at lists.alberg30.org
>> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>>
>
>


More information about the Public-List mailing list