[Public-List] Continued Fitment questions on Boom Vang choice

via Public-List public-list at lists.alberg30.org
Mon Nov 7 05:42:55 PST 2016


I have a garhauer vang as well. works wonderfully. Garhuaer custom
makes the mast and boom fittings based on drawings you provide. it is
hard to imagine that they would have sold a vang without making mast
fitting. My recollection is that the instructions for ordering the
vang included a request for the pattern for the mast and boom
fittings.
David, 432

	-----------------------------------------From: "Wes Gardner via
Public-List" 

To: "Don Campbell", "Alberg 30 Public List -- open to all"
Cc: "Bill McCoy"
Sent: 03-Nov-2016 13:36:50 +0000
Subject: Re: [Public-List] Continued Fitment questions on Boom Vang
choice

 Here's mine...just a simple arrangement of blocks led back to the
cockpit.
 In fact it is was cobbled together by a PO use a mast bail and a boom
 bail. It's the white line, the blue one is the tack line for the
asym.

 On Thu, Nov 3, 2016 at 9:17 AM, Don Campbell via Public-List <
 public-list at lists.alberg30.org> wrote:

 > Bill:
 > I know of two Alberg 30's that have Garhauer vangs. Both are in the
 > Canadian race fleet and the one is still in the box because the
first one
 > went on and tore the track off the mast that held the boom.
Garhauer made a
 > bracket for the boom fitting so that that boom now does not move on
the
 > mast. As far as I know, Phil really likes his set up and I will
eventually
 > get around to replacing the cloth vang I have, with the one in the
box,
 > once I figure out where to put the boom on the mast. If you do get
a
 > Garhauer, make sure you get the mast bracket too. They are a small
enough
 > company that they should be able to make the same one that was made
for
 > Gemini, # 362 and that was for the stock mast.
 > Don
 >
 > -----Original Message----- From: Bill McCoy via Public-List
 > Sent: Thursday, November 03, 2016 7:08 AM
 > To: public-list at lists.alberg30.org
 > Subject: [Public-List] Continued Fitment questions on Boom Vang
choice
 >
 >
 > So Hull 614 is back in the water. This time in South Carolina.
Photo at
 > link:
 >
 >
 > [IMG]http://i1358.photobucket.com/albums/q763/Skeep575/DSC_0
 /> > 479_zpsy8voe1sf.jpg[/IMG][/URL]
 >
 >
 > Update discussion threads on Boom Vangs. I've read the old posts
about
 > these.
 >
 >
 > Questions for the hearty: 1) For the Alberg, is there a consensus
on type
 > vang, blocks or rigid styles? I'm referring to any sort of setup.
 >
 >
 > 2) Garhauer was mentioned as supplying for Albergs specifically. Is
this
 > still the case that they are tuned-in to our design for boom vang
fitment?
 >
 >
 > Thanks all,
 >
 > skeep
 >
 >
 >
 >
 > Bill
 > _______________________________________________
 > These businesses support your Association:
 > http://www.alberg30.org/store/A30supporters.html
 /> > Please support them.
 > _______________________________________________
 > Public-List mailing list
 > Public-List at lists.alberg30.org
 > http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
 /> > _______________________________________________
 > These businesses support your Association:
 > http://www.alberg30.org/store/A30supporters.html
 /> > Please support them.
 > _______________________________________________
 > Public-List mailing list
 > Public-List at lists.alberg30.org
 > http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
 /> >
 _______________________________________________
 These businesses support your Association:
 http://www.alberg30.org/store/A30supporters.html
 /> Please support them.
 _______________________________________________
 Public-List mailing list
 Public-List at lists.alberg30.org
 http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
 />



More information about the Public-List mailing list