[Public-List] Spreader ties

[Mike Meinhold via Public-List]

Bill,
  I believe this is essentially a clamp. The screw provides enough tension
to close the gap slightly and hold the wire.

I have wooden spreaders on 272 but a similar arrangement in bronze.]

Mike
Rinn Duin #272

On Thu, Oct 20, 2016 at 7:08 AM, Bill McCoy via Public-List <
public-list at lists.alberg30.org> wrote:

> Spreader tips normally have seizing wire wrapped so that the tips set on
> the shrouds in a fixed location.  Photo attached reveals what I found
> underneath the chafe guards.
>
>
> [IMG]http://i1358.photobucket.com/albums/q763/Skeep575/
> 1014161127_HDR_zpsmomax0ib.jpg[/IMG]<http://[URL=http://
> s1358.photobucket.com/user/Skeep575/media/1014161127_HDR_
> zpsmomax0ib.jpg.html][IMG]http://i1358.photobucket.com/
> albums/q763/Skeep575/1014161127_HDR_zpsmomax0ib.jpg[/IMG][/URL]>
>
>
> Yet, the tip of the spreader does not seem to have anything but a screw
> through the end to which one might attach the wire.  Anyone comment on
> their's to provide any tips for how they wrapped and tied-to?
>
>
> Skeep
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>