[Public-List] Rudder Dimensions

[Michael Grosh via Public-List]

There seems to be a lot of variation in Whitby's rudder construction, but I
am pretty sure the rudder stock on your '68 is two piece. It is on my '67.
Makes it a lot easier to take off for working on the hardware.
Design drawings for '67 era are somewhere in the archives-used to be in the
collaborate section.
Michael Grosh
#220

On Mar 4, 2017 5:00 AM, "Greg Dawson via Public-List" <
public-list at lists.alberg30.org> wrote:

>
> Hi Greg
>
> Not a problem. I'm down at our boat over the next couple of days. I'll
> measure the thickness for you. One observation that I have to make is that
> my rudder on our 68 seems a little different to other maybe later boats in
> that the shaft and rudder are one piece.
>
> Greg.
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>