[Public-List] rudder

[Greg Roberts via Public-List]

Hi Greg,Thanks! I look forward to seeing your data.I'm reading between the lines but when i look at the 1969 drawing on the alberg site i see a rudder post that is meant to be encapsulated. The bronze rods are pressed fit in to the post... That fits with your observation that your rudder n post are a single unit.
Regards,
Greg



Fair Winds and Following Seas...

-------- Original message --------
From: via Public-List <public-list at lists.alberg30.org> 
Date: 3/4/17  12:07  (GMT-08:00) 
To: public-list at lists.alberg30.org 
Subject: Public-List Digest, Vol 3424, Issue 1 

Send Public-List mailing list submissions to
	public-list at lists.alberg30.org

To subscribe or unsubscribe via the World Wide Web, visit
	http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
or, via email, send a message with subject or body 'help' to
	public-list-request at lists.alberg30.org

You can reach the person managing the list at
	public-list-owner at lists.alberg30.org

When replying, please edit your Subject line so it is more specific
than "Re: Contents of Public-List digest..."


Please do NOT include the entire digest in your reply!
======================================================



Today's Topics:

   1. Still collecting rudder data (Greg Roberts via Public-List)
   2. Rudder Dimensions (Greg Dawson via Public-List)
   3. Re: Rudder Dimensions (Michael Grosh via Public-List)


----------------------------------------------------------------------

Message: 1
Date: Fri, 03 Mar 2017 19:41:43 -0800
From: Greg Roberts via Public-List <public-list at lists.alberg30.org>
To: Alberg30 List <public-list at lists.alberg30.org>
Subject: [Public-List] Still collecting rudder data
Message-ID: <3cade4355674be64933fd3f5409bdccb at smtp.hushmail.com>
Content-Type: text/plain; charset=utf-8


    
Hey Folks,I'm still working through the design details of the rudder. Any chance a few folks can measure the thickness of their fiberglass rudders? Please confirm that, like Gord's, they have flat, parallel sides?
Regards,
Greg


Fair Winds and Following Seas...

------------------------------

Message: 2
Date: Sat, 4 Mar 2017 05:00:10 -0500
From: Greg Dawson via Public-List <public-list at lists.alberg30.org>
To: public-list at lists.alberg30.org
Subject: [Public-List] Rudder Dimensions
Message-ID: <15a98c32643-3236-ef85 at webprd-a40.mail.aol.com>
Content-Type: text/plain; charset=utf-8


Hi Greg 

Not a problem. I'm down at our boat over the next couple of days. I'll measure the thickness for you. One observation that I have to make is that my rudder on our 68 seems a little different to other maybe later boats in that the shaft and rudder are one piece.

Greg.


------------------------------

Message: 3
Date: Sat, 4 Mar 2017 07:23:36 -0500
From: Michael Grosh via Public-List <public-list at lists.alberg30.org>
To: Alberg 30 Public List -- open to all
	<public-list at lists.alberg30.org>,	Greg Dawson <gregdaws at aol.co.uk>
Subject: Re: [Public-List] Rudder Dimensions
Message-ID:
	<CAO99GuHr_FXEk_gS8_u4vSiUQ2_GyxLu54VKrQjO1NAssqBa6Q at mail.gmail.com>
Content-Type: text/plain; charset=UTF-8

There seems to be a lot of variation in Whitby's rudder construction, but I
am pretty sure the rudder stock on your '68 is two piece. It is on my '67.
Makes it a lot easier to take off for working on the hardware.
Design drawings for '67 era are somewhere in the archives-used to be in the
collaborate section.
Michael Grosh
#220

On Mar 4, 2017 5:00 AM, "Greg Dawson via Public-List" <
public-list at lists.alberg30.org> wrote:

>
> Hi Greg
>
> Not a problem. I'm down at our boat over the next couple of days. I'll
> measure the thickness for you. One observation that I have to make is that
> my rudder on our 68 seems a little different to other maybe later boats in
> that the shaft and rudder are one piece.
>
> Greg.
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>


------------------------------

Subject: Digest Footer

_______________________________________________
These businesses support your Association:
http://www.alberg30.org/store/A30supporters.html
Please support them.
_______________________________________________
Public-List mailing list
Public-List at lists.alberg30.org
http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org


------------------------------

End of Public-List Digest, Vol 3424, Issue 1
********************************************