[Public-List] rudder

Gordon Laco via Public-List public-list at lists.alberg30.org
Sun Mar 5 04:51:44 PST 2017


I was over at Surprise yesterday.   The leading edge of the rudder in the prop aperture is about 2" thick... And something under 1" thick at to the trailing edge. 

I measured using thumb widths.  Very scientific. 

Gord 426 Surprise

On 2017-03-05, at 3:11 AM, Greg Roberts via Public-List <public-list at lists.alberg30.org> wrote:

> 
> 
> Hi Greg,Thanks! I look forward to seeing your data.I'm reading between the lines but when i look at the 1969 drawing on the alberg site i see a rudder post that is meant to be encapsulated. The bronze rods are pressed fit in to the post... That fits with your observation that your rudder n post are a single unit.
> Regards,
> Greg
> 
> 
> 
> Fair Winds and Following Seas...
> 
> -------- Original message --------
> From: via Public-List <public-list at lists.alberg30.org> 
> Date: 3/4/17  12:07  (GMT-08:00) 
> To: public-list at lists.alberg30.org 
> Subject: Public-List Digest, Vol 3424, Issue 1 
> 
> Send Public-List mailing list submissions to
>    public-list at lists.alberg30.org
> 
> To subscribe or unsubscribe via the World Wide Web, visit
>    http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> or, via email, send a message with subject or body 'help' to
>    public-list-request at lists.alberg30.org
> 
> You can reach the person managing the list at
>    public-list-owner at lists.alberg30.org
> 
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of Public-List digest..."
> 
> 
> Please do NOT include the entire digest in your reply!
> ======================================================
> 
> 
> 
> Today's Topics:
> 
>    1. Still collecting rudder data (Greg Roberts via Public-List)
>    2. Rudder Dimensions (Greg Dawson via Public-List)
>    3. Re: Rudder Dimensions (Michael Grosh via Public-List)
> 
> 
> ----------------------------------------------------------------------
> 
> Message: 1
> Date: Fri, 03 Mar 2017 19:41:43 -0800
> From: Greg Roberts via Public-List <public-list at lists.alberg30.org>
> To: Alberg30 List <public-list at lists.alberg30.org>
> Subject: [Public-List] Still collecting rudder data
> Message-ID: <3cade4355674be64933fd3f5409bdccb at smtp.hushmail.com>
> Content-Type: text/plain; charset=utf-8
> 
> 
>     
> Hey Folks,I'm still working through the design details of the rudder. Any chance a few folks can measure the thickness of their fiberglass rudders? Please confirm that, like Gord's, they have flat, parallel sides?
> Regards,
> Greg
> 
> 
> Fair Winds and Following Seas...
> 
> ------------------------------
> 
> Message: 2
> Date: Sat, 4 Mar 2017 05:00:10 -0500
> From: Greg Dawson via Public-List <public-list at lists.alberg30.org>
> To: public-list at lists.alberg30.org
> Subject: [Public-List] Rudder Dimensions
> Message-ID: <15a98c32643-3236-ef85 at webprd-a40.mail.aol.com>
> Content-Type: text/plain; charset=utf-8
> 
> 
> Hi Greg 
> 
> Not a problem. I'm down at our boat over the next couple of days. I'll measure the thickness for you. One observation that I have to make is that my rudder on our 68 seems a little different to other maybe later boats in that the shaft and rudder are one piece.
> 
> Greg.
> 
> 
> ------------------------------
> 
> Message: 3
> Date: Sat, 4 Mar 2017 07:23:36 -0500
> From: Michael Grosh via Public-List <public-list at lists.alberg30.org>
> To: Alberg 30 Public List -- open to all
>    <public-list at lists.alberg30.org>,    Greg Dawson <gregdaws at aol.co.uk>
> Subject: Re: [Public-List] Rudder Dimensions
> Message-ID:
>    <CAO99GuHr_FXEk_gS8_u4vSiUQ2_GyxLu54VKrQjO1NAssqBa6Q at mail.gmail.com>
> Content-Type: text/plain; charset=UTF-8
> 
> There seems to be a lot of variation in Whitby's rudder construction, but I
> am pretty sure the rudder stock on your '68 is two piece. It is on my '67.
> Makes it a lot easier to take off for working on the hardware.
> Design drawings for '67 era are somewhere in the archives-used to be in the
> collaborate section.
> Michael Grosh
> #220
> 
> On Mar 4, 2017 5:00 AM, "Greg Dawson via Public-List" <
> public-list at lists.alberg30.org> wrote:
> 
>> 
>> Hi Greg
>> 
>> Not a problem. I'm down at our boat over the next couple of days. I'll
>> measure the thickness for you. One observation that I have to make is that
>> my rudder on our 68 seems a little different to other maybe later boats in
>> that the shaft and rudder are one piece.
>> 
>> Greg.
>> _______________________________________________
>> These businesses support your Association:
>> http://www.alberg30.org/store/A30supporters.html
>> Please support them.
>> _______________________________________________
>> Public-List mailing list
>> Public-List at lists.alberg30.org
>> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> 
> 
> ------------------------------
> 
> Subject: Digest Footer
> 
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> 
> 
> ------------------------------
> 
> End of Public-List Digest, Vol 3424, Issue 1
> ********************************************
> 
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org



More information about the Public-List mailing list