[Public-List] rudder

Michael Grosh via Public-List public-list at lists.alberg30.org
Sun Mar 5 07:26:47 PST 2017


The bronze rods are flat head slotted machine screws counter sunk into the
rudder stock-the top section, anyway.
Michael Grosh
#220

On Mar 5, 2017 3:11 AM, "Greg Roberts via Public-List" <
public-list at lists.alberg30.org> wrote:

>
>
> Hi Greg,Thanks! I look forward to seeing your data.I'm reading between the
> lines but when i look at the 1969 drawing on the alberg site i see a rudder
> post that is meant to be encapsulated. The bronze rods are pressed fit in
> to the post... That fits with your observation that your rudder n post are
> a single unit.
> Regards,
> Greg
>
>
>
> Fair Winds and Following Seas...
>
> -------- Original message --------
> From: via Public-List <public-list at lists.alberg30.org>
> Date: 3/4/17  12:07  (GMT-08:00)
> To: public-list at lists.alberg30.org
> Subject: Public-List Digest, Vol 3424, Issue 1
>
> Send Public-List mailing list submissions to
>         public-list at lists.alberg30.org
>
> To subscribe or unsubscribe via the World Wide Web, visit
>         http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> or, via email, send a message with subject or body 'help' to
>         public-list-request at lists.alberg30.org
>
> You can reach the person managing the list at
>         public-list-owner at lists.alberg30.org
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of Public-List digest..."
>
>
> Please do NOT include the entire digest in your reply!
> ======================================================
>
>
>
> Today's Topics:
>
>    1. Still collecting rudder data (Greg Roberts via Public-List)
>    2. Rudder Dimensions (Greg Dawson via Public-List)
>    3. Re: Rudder Dimensions (Michael Grosh via Public-List)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Fri, 03 Mar 2017 19:41:43 -0800
> From: Greg Roberts via Public-List <public-list at lists.alberg30.org>
> To: Alberg30 List <public-list at lists.alberg30.org>
> Subject: [Public-List] Still collecting rudder data
> Message-ID: <3cade4355674be64933fd3f5409bdccb at smtp.hushmail.com>
> Content-Type: text/plain; charset=utf-8
>
>
>
> Hey Folks,I'm still working through the design details of the rudder. Any
> chance a few folks can measure the thickness of their fiberglass rudders?
> Please confirm that, like Gord's, they have flat, parallel sides?
> Regards,
> Greg
>
>
> Fair Winds and Following Seas...
>
> ------------------------------
>
> Message: 2
> Date: Sat, 4 Mar 2017 05:00:10 -0500
> From: Greg Dawson via Public-List <public-list at lists.alberg30.org>
> To: public-list at lists.alberg30.org
> Subject: [Public-List] Rudder Dimensions
> Message-ID: <15a98c32643-3236-ef85 at webprd-a40.mail.aol.com>
> Content-Type: text/plain; charset=utf-8
>
>
> Hi Greg
>
> Not a problem. I'm down at our boat over the next couple of days. I'll
> measure the thickness for you. One observation that I have to make is that
> my rudder on our 68 seems a little different to other maybe later boats in
> that the shaft and rudder are one piece.
>
> Greg.
>
>
> ------------------------------
>
> Message: 3
> Date: Sat, 4 Mar 2017 07:23:36 -0500
> From: Michael Grosh via Public-List <public-list at lists.alberg30.org>
> To: Alberg 30 Public List -- open to all
>         <public-list at lists.alberg30.org>,       Greg Dawson <
> gregdaws at aol.co.uk>
> Subject: Re: [Public-List] Rudder Dimensions
> Message-ID:
>         <CAO99GuHr_FXEk_gS8_u4vSiUQ2_GyxLu54VKrQjO1NAssqBa6Q at mail.
> gmail.com>
> Content-Type: text/plain; charset=UTF-8
>
> There seems to be a lot of variation in Whitby's rudder construction, but I
> am pretty sure the rudder stock on your '68 is two piece. It is on my '67.
> Makes it a lot easier to take off for working on the hardware.
> Design drawings for '67 era are somewhere in the archives-used to be in the
> collaborate section.
> Michael Grosh
> #220
>
> On Mar 4, 2017 5:00 AM, "Greg Dawson via Public-List" <
> public-list at lists.alberg30.org> wrote:
>
> >
> > Hi Greg
> >
> > Not a problem. I'm down at our boat over the next couple of days. I'll
> > measure the thickness for you. One observation that I have to make is
> that
> > my rudder on our 68 seems a little different to other maybe later boats
> in
> > that the shaft and rudder are one piece.
> >
> > Greg.
> > _______________________________________________
> > These businesses support your Association:
> > http://www.alberg30.org/store/A30supporters.html
> > Please support them.
> > _______________________________________________
> > Public-List mailing list
> > Public-List at lists.alberg30.org
> > http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> >
>
>
> ------------------------------
>
> Subject: Digest Footer
>
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>
>
> ------------------------------
>
> End of Public-List Digest, Vol 3424, Issue 1
> ********************************************
>
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>



More information about the Public-List mailing list