[Public-List] Rudder stocks & rudder taper.

[Mike Lehman via Public-List]

Check with New Found Metals

On Mar 7, 2017 6:30 AM, "Greg Dawson via Public-List" <
public-list at lists.alberg30.org> wrote:

>
> Dear all
>
> Greg... Our rudder tapers from approximately 2 inches to 1 inch.
>
> As for the rudder stock. I was digging around with my faithful old paint
> scraper yesterday as our rudder has to come off. Digging pits or lifting
> the boat are not an option right now. I hear what everyone is saying that
> the stock and rudder are held together with bronze machine screws but I
> don't see them. the rudder stock seems to be encased in what looks to be
> approximately 1/4 inch of glass. There is even what appears to be a join
> line in the glass / gel coat down the centre of where the rudder stock
> should be. Am I missing something.
>
> It looks as though work has been done on our boat as the bolt for the shoe
> is stainless and the bronze pintal has been replaced with a stainless
> strap. I need a new 2 piece bronze pintal and shoe. does anyone know where
> I could purchase these please.
>
> Your help would be appreciated.
>
> Greg
> #348
>
>
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>