[Public-List] Rudder stocks & rudder taper.

[Mike Lehman via Public-List]

Greg,

Be cautious about the rudder pin in SS. Here is what the SS pin looked like
when George Dinwiddie removed his:

http://www.alberg30.org/maintenance/Steering/CreviceCorrosion/

On Tue, Mar 7, 2017 at 8:20 AM, Mike Lehman <mlehman at gmail.com> wrote:

> Check with New Found Metals
>
> On Mar 7, 2017 6:30 AM, "Greg Dawson via Public-List" <
> public-list at lists.alberg30.org> wrote:
>
>>
>> Dear all
>>
>> Greg... Our rudder tapers from approximately 2 inches to 1 inch.
>>
>> As for the rudder stock. I was digging around with my faithful old paint
>> scraper yesterday as our rudder has to come off. Digging pits or lifting
>> the boat are not an option right now. I hear what everyone is saying that
>> the stock and rudder are held together with bronze machine screws but I
>> don't see them. the rudder stock seems to be encased in what looks to be
>> approximately 1/4 inch of glass. There is even what appears to be a join
>> line in the glass / gel coat down the centre of where the rudder stock
>> should be. Am I missing something.
>>
>> It looks as though work has been done on our boat as the bolt for the
>> shoe is stainless and the bronze pintal has been replaced with a stainless
>> strap. I need a new 2 piece bronze pintal and shoe. does anyone know where
>> I could purchase these please.
>>
>> Your help would be appreciated.
>>
>> Greg
>> #348
>>
>>
>> _______________________________________________
>> These businesses support your Association:
>> http://www.alberg30.org/store/A30supporters.html
>> Please support them.
>> _______________________________________________
>> Public-List mailing list
>> Public-List at lists.alberg30.org
>> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>>
>


-- 
Mike Lehman
~~~_/)_/)~~_/)~~~